404

[ Avaa Bypassed ]




Upload:

Command:

botdev@3.147.27.20: ~ $
/*
 * Copyright (C) 2013 Imagination Technologies
 * Author: Paul Burton <paul.burton@mips.com>
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

#ifndef __MIPS_ASM_MIPS_CPS_H__
# error Please include asm/mips-cps.h rather than asm/mips-cm.h
#endif

#ifndef __MIPS_ASM_MIPS_CM_H__
#define __MIPS_ASM_MIPS_CM_H__

#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/errno.h>

/* The base address of the CM GCR block */
extern void __iomem *mips_gcr_base;

/* The base address of the CM L2-only sync region */
extern void __iomem *mips_cm_l2sync_base;

/**
 * __mips_cm_phys_base - retrieve the physical base address of the CM
 *
 * This function returns the physical base address of the Coherence Manager
 * global control block, or 0 if no Coherence Manager is present. It provides
 * a default implementation which reads the CMGCRBase register where available,
 * and may be overridden by platforms which determine this address in a
 * different way by defining a function with the same prototype except for the
 * name mips_cm_phys_base (without underscores).
 */
extern phys_addr_t __mips_cm_phys_base(void);

/*
 * mips_cm_is64 - determine CM register width
 *
 * The CM register width is determined by the version of the CM, with CM3
 * introducing 64 bit GCRs and all prior CM versions having 32 bit GCRs.
 * However we may run a kernel built for MIPS32 on a system with 64 bit GCRs,
 * or vice-versa. This variable indicates the width of the memory accesses
 * that the kernel will perform to GCRs, which may differ from the actual
 * width of the GCRs.
 *
 * It's set to 0 for 32-bit accesses and 1 for 64-bit accesses.
 */
extern int mips_cm_is64;

/**
 * mips_cm_error_report - Report CM cache errors
 */
#ifdef CONFIG_MIPS_CM
extern void mips_cm_error_report(void);
#else
static inline void mips_cm_error_report(void) {}
#endif

/**
 * mips_cm_probe - probe for a Coherence Manager
 *
 * Attempt to detect the presence of a Coherence Manager. Returns 0 if a CM
 * is successfully detected, else -errno.
 */
#ifdef CONFIG_MIPS_CM
extern int mips_cm_probe(void);
#else
static inline int mips_cm_probe(void)
{
	return -ENODEV;
}
#endif

/**
 * mips_cm_present - determine whether a Coherence Manager is present
 *
 * Returns true if a CM is present in the system, else false.
 */
static inline bool mips_cm_present(void)
{
#ifdef CONFIG_MIPS_CM
	return mips_gcr_base != NULL;
#else
	return false;
#endif
}

/**
 * mips_cm_has_l2sync - determine whether an L2-only sync region is present
 *
 * Returns true if the system implements an L2-only sync region, else false.
 */
static inline bool mips_cm_has_l2sync(void)
{
#ifdef CONFIG_MIPS_CM
	return mips_cm_l2sync_base != NULL;
#else
	return false;
#endif
}

/* Offsets to register blocks from the CM base address */
#define MIPS_CM_GCB_OFS		0x0000 /* Global Control Block */
#define MIPS_CM_CLCB_OFS	0x2000 /* Core Local Control Block */
#define MIPS_CM_COCB_OFS	0x4000 /* Core Other Control Block */
#define MIPS_CM_GDB_OFS		0x6000 /* Global Debug Block */

/* Total size of the CM memory mapped registers */
#define MIPS_CM_GCR_SIZE	0x8000

/* Size of the L2-only sync region */
#define MIPS_CM_L2SYNC_SIZE	0x1000

#define GCR_ACCESSOR_RO(sz, off, name)					\
	CPS_ACCESSOR_RO(gcr, sz, MIPS_CM_GCB_OFS + off, name)		\
	CPS_ACCESSOR_RO(gcr, sz, MIPS_CM_COCB_OFS + off, redir_##name)

#define GCR_ACCESSOR_RW(sz, off, name)					\
	CPS_ACCESSOR_RW(gcr, sz, MIPS_CM_GCB_OFS + off, name)		\
	CPS_ACCESSOR_RW(gcr, sz, MIPS_CM_COCB_OFS + off, redir_##name)

#define GCR_CX_ACCESSOR_RO(sz, off, name)				\
	CPS_ACCESSOR_RO(gcr, sz, MIPS_CM_CLCB_OFS + off, cl_##name)	\
	CPS_ACCESSOR_RO(gcr, sz, MIPS_CM_COCB_OFS + off, co_##name)

#define GCR_CX_ACCESSOR_RW(sz, off, name)				\
	CPS_ACCESSOR_RW(gcr, sz, MIPS_CM_CLCB_OFS + off, cl_##name)	\
	CPS_ACCESSOR_RW(gcr, sz, MIPS_CM_COCB_OFS + off, co_##name)

/* GCR_CONFIG - Information about the system */
GCR_ACCESSOR_RO(64, 0x000, config)
#define CM_GCR_CONFIG_CLUSTER_COH_CAPABLE	BIT_ULL(43)
#define CM_GCR_CONFIG_CLUSTER_ID		GENMASK_ULL(39, 32)
#define CM_GCR_CONFIG_NUM_CLUSTERS		GENMASK(29, 23)
#define CM_GCR_CONFIG_NUMIOCU			GENMASK(15, 8)
#define CM_GCR_CONFIG_PCORES			GENMASK(7, 0)

/* GCR_BASE - Base address of the Global Configuration Registers (GCRs) */
GCR_ACCESSOR_RW(64, 0x008, base)
#define CM_GCR_BASE_GCRBASE			GENMASK_ULL(47, 15)
#define CM_GCR_BASE_CMDEFTGT			GENMASK(1, 0)
#define  CM_GCR_BASE_CMDEFTGT_MEM		0
#define  CM_GCR_BASE_CMDEFTGT_RESERVED		1
#define  CM_GCR_BASE_CMDEFTGT_IOCU0		2
#define  CM_GCR_BASE_CMDEFTGT_IOCU1		3

/* GCR_ACCESS - Controls core/IOCU access to GCRs */
GCR_ACCESSOR_RW(32, 0x020, access)
#define CM_GCR_ACCESS_ACCESSEN			GENMASK(7, 0)

/* GCR_REV - Indicates the Coherence Manager revision */
GCR_ACCESSOR_RO(32, 0x030, rev)
#define CM_GCR_REV_MAJOR			GENMASK(15, 8)
#define CM_GCR_REV_MINOR			GENMASK(7, 0)

#define CM_ENCODE_REV(major, minor) \
		(FIELD_PREP(CM_GCR_REV_MAJOR, major) | \
		 FIELD_PREP(CM_GCR_REV_MINOR, minor))

#define CM_REV_CM2				CM_ENCODE_REV(6, 0)
#define CM_REV_CM2_5				CM_ENCODE_REV(7, 0)
#define CM_REV_CM3				CM_ENCODE_REV(8, 0)
#define CM_REV_CM3_5				CM_ENCODE_REV(9, 0)

/* GCR_ERR_CONTROL - Control error checking logic */
GCR_ACCESSOR_RW(32, 0x038, err_control)
#define CM_GCR_ERR_CONTROL_L2_ECC_EN		BIT(1)
#define CM_GCR_ERR_CONTROL_L2_ECC_SUPPORT	BIT(0)

/* GCR_ERR_MASK - Control which errors are reported as interrupts */
GCR_ACCESSOR_RW(64, 0x040, error_mask)

/* GCR_ERR_CAUSE - Indicates the type of error that occurred */
GCR_ACCESSOR_RW(64, 0x048, error_cause)
#define CM_GCR_ERROR_CAUSE_ERRTYPE		GENMASK(31, 27)
#define CM3_GCR_ERROR_CAUSE_ERRTYPE		GENMASK_ULL(63, 58)
#define CM_GCR_ERROR_CAUSE_ERRINFO		GENMASK(26, 0)

/* GCR_ERR_ADDR - Indicates the address associated with an error */
GCR_ACCESSOR_RW(64, 0x050, error_addr)

/* GCR_ERR_MULT - Indicates when multiple errors have occurred */
GCR_ACCESSOR_RW(64, 0x058, error_mult)
#define CM_GCR_ERROR_MULT_ERR2ND		GENMASK(4, 0)

/* GCR_L2_ONLY_SYNC_BASE - Base address of the L2 cache-only sync region */
GCR_ACCESSOR_RW(64, 0x070, l2_only_sync_base)
#define CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE	GENMASK(31, 12)
#define CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN		BIT(0)

/* GCR_GIC_BASE - Base address of the Global Interrupt Controller (GIC) */
GCR_ACCESSOR_RW(64, 0x080, gic_base)
#define CM_GCR_GIC_BASE_GICBASE			GENMASK(31, 17)
#define CM_GCR_GIC_BASE_GICEN			BIT(0)

/* GCR_CPC_BASE - Base address of the Cluster Power Controller (CPC) */
GCR_ACCESSOR_RW(64, 0x088, cpc_base)
#define CM_GCR_CPC_BASE_CPCBASE			GENMASK(31, 15)
#define CM_GCR_CPC_BASE_CPCEN			BIT(0)

/* GCR_REGn_BASE - Base addresses of CM address regions */
GCR_ACCESSOR_RW(64, 0x090, reg0_base)
GCR_ACCESSOR_RW(64, 0x0a0, reg1_base)
GCR_ACCESSOR_RW(64, 0x0b0, reg2_base)
GCR_ACCESSOR_RW(64, 0x0c0, reg3_base)
#define CM_GCR_REGn_BASE_BASEADDR		GENMASK(31, 16)

/* GCR_REGn_MASK - Size & destination of CM address regions */
GCR_ACCESSOR_RW(64, 0x098, reg0_mask)
GCR_ACCESSOR_RW(64, 0x0a8, reg1_mask)
GCR_ACCESSOR_RW(64, 0x0b8, reg2_mask)
GCR_ACCESSOR_RW(64, 0x0c8, reg3_mask)
#define CM_GCR_REGn_MASK_ADDRMASK		GENMASK(31, 16)
#define CM_GCR_REGn_MASK_CCAOVR			GENMASK(7, 5)
#define CM_GCR_REGn_MASK_CCAOVREN		BIT(4)
#define CM_GCR_REGn_MASK_DROPL2			BIT(2)
#define CM_GCR_REGn_MASK_CMTGT			GENMASK(1, 0)
#define  CM_GCR_REGn_MASK_CMTGT_DISABLED	0x0
#define  CM_GCR_REGn_MASK_CMTGT_MEM		0x1
#define  CM_GCR_REGn_MASK_CMTGT_IOCU0		0x2
#define  CM_GCR_REGn_MASK_CMTGT_IOCU1		0x3

/* GCR_GIC_STATUS - Indicates presence of a Global Interrupt Controller (GIC) */
GCR_ACCESSOR_RO(32, 0x0d0, gic_status)
#define CM_GCR_GIC_STATUS_EX			BIT(0)

/* GCR_CPC_STATUS - Indicates presence of a Cluster Power Controller (CPC) */
GCR_ACCESSOR_RO(32, 0x0f0, cpc_status)
#define CM_GCR_CPC_STATUS_EX			BIT(0)

/* GCR_L2_CONFIG - Indicates L2 cache configuration when Config5.L2C=1 */
GCR_ACCESSOR_RW(32, 0x130, l2_config)
#define CM_GCR_L2_CONFIG_BYPASS			BIT(20)
#define CM_GCR_L2_CONFIG_SET_SIZE		GENMASK(15, 12)
#define CM_GCR_L2_CONFIG_LINE_SIZE		GENMASK(11, 8)
#define CM_GCR_L2_CONFIG_ASSOC			GENMASK(7, 0)

/* GCR_SYS_CONFIG2 - Further information about the system */
GCR_ACCESSOR_RO(32, 0x150, sys_config2)
#define CM_GCR_SYS_CONFIG2_MAXVPW		GENMASK(3, 0)

/* GCR_L2_PFT_CONTROL - Controls hardware L2 prefetching */
GCR_ACCESSOR_RW(32, 0x300, l2_pft_control)
#define CM_GCR_L2_PFT_CONTROL_PAGEMASK		GENMASK(31, 12)
#define CM_GCR_L2_PFT_CONTROL_PFTEN		BIT(8)
#define CM_GCR_L2_PFT_CONTROL_NPFT		GENMASK(7, 0)

/* GCR_L2_PFT_CONTROL_B - Controls hardware L2 prefetching */
GCR_ACCESSOR_RW(32, 0x308, l2_pft_control_b)
#define CM_GCR_L2_PFT_CONTROL_B_CEN		BIT(8)
#define CM_GCR_L2_PFT_CONTROL_B_PORTID		GENMASK(7, 0)

/* GCR_L2SM_COP - L2 cache op state machine control */
GCR_ACCESSOR_RW(32, 0x620, l2sm_cop)
#define CM_GCR_L2SM_COP_PRESENT			BIT(31)
#define CM_GCR_L2SM_COP_RESULT			GENMASK(8, 6)
#define  CM_GCR_L2SM_COP_RESULT_DONTCARE	0
#define  CM_GCR_L2SM_COP_RESULT_DONE_OK		1
#define  CM_GCR_L2SM_COP_RESULT_DONE_ERROR	2
#define  CM_GCR_L2SM_COP_RESULT_ABORT_OK	3
#define  CM_GCR_L2SM_COP_RESULT_ABORT_ERROR	4
#define CM_GCR_L2SM_COP_RUNNING			BIT(5)
#define CM_GCR_L2SM_COP_TYPE			GENMASK(4, 2)
#define  CM_GCR_L2SM_COP_TYPE_IDX_WBINV		0
#define  CM_GCR_L2SM_COP_TYPE_IDX_STORETAG	1
#define  CM_GCR_L2SM_COP_TYPE_IDX_STORETAGDATA	2
#define  CM_GCR_L2SM_COP_TYPE_HIT_INV		4
#define  CM_GCR_L2SM_COP_TYPE_HIT_WBINV		5
#define  CM_GCR_L2SM_COP_TYPE_HIT_WB		6
#define  CM_GCR_L2SM_COP_TYPE_FETCHLOCK		7
#define CM_GCR_L2SM_COP_CMD			GENMASK(1, 0)
#define  CM_GCR_L2SM_COP_CMD_START		1	/* only when idle */
#define  CM_GCR_L2SM_COP_CMD_ABORT		3	/* only when running */

/* GCR_L2SM_TAG_ADDR_COP - L2 cache op state machine address control */
GCR_ACCESSOR_RW(64, 0x628, l2sm_tag_addr_cop)
#define CM_GCR_L2SM_TAG_ADDR_COP_NUM_LINES	GENMASK_ULL(63, 48)
#define CM_GCR_L2SM_TAG_ADDR_COP_START_TAG	GENMASK_ULL(47, 6)

/* GCR_BEV_BASE - Controls the location of the BEV for powered up cores */
GCR_ACCESSOR_RW(64, 0x680, bev_base)

/* GCR_Cx_RESET_RELEASE - Controls core reset for CM 1.x */
GCR_CX_ACCESSOR_RW(32, 0x000, reset_release)

/* GCR_Cx_COHERENCE - Controls core coherence */
GCR_CX_ACCESSOR_RW(32, 0x008, coherence)
#define CM_GCR_Cx_COHERENCE_COHDOMAINEN		GENMASK(7, 0)
#define CM3_GCR_Cx_COHERENCE_COHEN		BIT(0)

/* GCR_Cx_CONFIG - Information about a core's configuration */
GCR_CX_ACCESSOR_RO(32, 0x010, config)
#define CM_GCR_Cx_CONFIG_IOCUTYPE		GENMASK(11, 10)
#define CM_GCR_Cx_CONFIG_PVPE			GENMASK(9, 0)

/* GCR_Cx_OTHER - Configure the core-other/redirect GCR block */
GCR_CX_ACCESSOR_RW(32, 0x018, other)
#define CM_GCR_Cx_OTHER_CORENUM			GENMASK(31, 16)	/* CM < 3 */
#define CM_GCR_Cx_OTHER_CLUSTER_EN		BIT(31)		/* CM >= 3.5 */
#define CM_GCR_Cx_OTHER_GIC_EN			BIT(30)		/* CM >= 3.5 */
#define CM_GCR_Cx_OTHER_BLOCK			GENMASK(25, 24)	/* CM >= 3.5 */
#define  CM_GCR_Cx_OTHER_BLOCK_LOCAL		0
#define  CM_GCR_Cx_OTHER_BLOCK_GLOBAL		1
#define  CM_GCR_Cx_OTHER_BLOCK_USER		2
#define  CM_GCR_Cx_OTHER_BLOCK_GLOBAL_HIGH	3
#define CM_GCR_Cx_OTHER_CLUSTER			GENMASK(21, 16)	/* CM >= 3.5 */
#define CM3_GCR_Cx_OTHER_CORE			GENMASK(13, 8)	/* CM >= 3 */
#define  CM_GCR_Cx_OTHER_CORE_CM		32
#define CM3_GCR_Cx_OTHER_VP			GENMASK(2, 0)	/* CM >= 3 */

/* GCR_Cx_RESET_BASE - Configure where powered up cores will fetch from */
GCR_CX_ACCESSOR_RW(32, 0x020, reset_base)
#define CM_GCR_Cx_RESET_BASE_BEVEXCBASE		GENMASK(31, 12)

/* GCR_Cx_ID - Identify the current core */
GCR_CX_ACCESSOR_RO(32, 0x028, id)
#define CM_GCR_Cx_ID_CLUSTER			GENMASK(15, 8)
#define CM_GCR_Cx_ID_CORE			GENMASK(7, 0)

/* GCR_Cx_RESET_EXT_BASE - Configure behaviour when cores reset or power up */
GCR_CX_ACCESSOR_RW(32, 0x030, reset_ext_base)
#define CM_GCR_Cx_RESET_EXT_BASE_EVARESET	BIT(31)
#define CM_GCR_Cx_RESET_EXT_BASE_UEB		BIT(30)
#define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCMASK	GENMASK(27, 20)
#define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCPA	GENMASK(7, 1)
#define CM_GCR_Cx_RESET_EXT_BASE_PRESENT	BIT(0)

/**
 * mips_cm_l2sync - perform an L2-only sync operation
 *
 * If an L2-only sync region is present in the system then this function
 * performs and L2-only sync and returns zero. Otherwise it returns -ENODEV.
 */
static inline int mips_cm_l2sync(void)
{
	if (!mips_cm_has_l2sync())
		return -ENODEV;

	writel(0, mips_cm_l2sync_base);
	return 0;
}

/**
 * mips_cm_revision() - return CM revision
 *
 * Return: The revision of the CM, from GCR_REV, or 0 if no CM is present. The
 * return value should be checked against the CM_REV_* macros.
 */
static inline int mips_cm_revision(void)
{
	if (!mips_cm_present())
		return 0;

	return read_gcr_rev();
}

/**
 * mips_cm_max_vp_width() - return the width in bits of VP indices
 *
 * Return: the width, in bits, of VP indices in fields that combine core & VP
 * indices.
 */
static inline unsigned int mips_cm_max_vp_width(void)
{
	extern int smp_num_siblings;

	if (mips_cm_revision() >= CM_REV_CM3)
		return FIELD_GET(CM_GCR_SYS_CONFIG2_MAXVPW,
				 read_gcr_sys_config2());

	if (mips_cm_present()) {
		/*
		 * We presume that all cores in the system will have the same
		 * number of VP(E)s, and if that ever changes then this will
		 * need revisiting.
		 */
		return FIELD_GET(CM_GCR_Cx_CONFIG_PVPE, read_gcr_cl_config()) + 1;
	}

	if (IS_ENABLED(CONFIG_SMP))
		return smp_num_siblings;

	return 1;
}

/**
 * mips_cm_vp_id() - calculate the hardware VP ID for a CPU
 * @cpu: the CPU whose VP ID to calculate
 *
 * Hardware such as the GIC uses identifiers for VPs which may not match the
 * CPU numbers used by Linux. This function calculates the hardware VP
 * identifier corresponding to a given CPU.
 *
 * Return: the VP ID for the CPU.
 */
static inline unsigned int mips_cm_vp_id(unsigned int cpu)
{
	unsigned int core = cpu_core(&cpu_data[cpu]);
	unsigned int vp = cpu_vpe_id(&cpu_data[cpu]);

	return (core * mips_cm_max_vp_width()) + vp;
}

#ifdef CONFIG_MIPS_CM

/**
 * mips_cm_lock_other - lock access to redirect/other region
 * @cluster: the other cluster to be accessed
 * @core: the other core to be accessed
 * @vp: the VP within the other core to be accessed
 * @block: the register block to be accessed
 *
 * Configure the redirect/other region for the local core/VP (depending upon
 * the CM revision) to target the specified @cluster, @core, @vp & register
 * @block. Must be called before using the redirect/other region, and followed
 * by a call to mips_cm_unlock_other() when access to the redirect/other region
 * is complete.
 *
 * This function acquires a spinlock such that code between it &
 * mips_cm_unlock_other() calls cannot be pre-empted by anything which may
 * reconfigure the redirect/other region, and cannot be interfered with by
 * another VP in the core. As such calls to this function should not be nested.
 */
extern void mips_cm_lock_other(unsigned int cluster, unsigned int core,
			       unsigned int vp, unsigned int block);

/**
 * mips_cm_unlock_other - unlock access to redirect/other region
 *
 * Must be called after mips_cm_lock_other() once all required access to the
 * redirect/other region has been completed.
 */
extern void mips_cm_unlock_other(void);

#else /* !CONFIG_MIPS_CM */

static inline void mips_cm_lock_other(unsigned int cluster, unsigned int core,
				      unsigned int vp, unsigned int block) { }
static inline void mips_cm_unlock_other(void) { }

#endif /* !CONFIG_MIPS_CM */

/**
 * mips_cm_lock_other_cpu - lock access to redirect/other region
 * @cpu: the other CPU whose register we want to access
 *
 * Configure the redirect/other region for the local core/VP (depending upon
 * the CM revision) to target the specified @cpu & register @block. This is
 * equivalent to calling mips_cm_lock_other() but accepts a Linux CPU number
 * for convenience.
 */
static inline void mips_cm_lock_other_cpu(unsigned int cpu, unsigned int block)
{
	struct cpuinfo_mips *d = &cpu_data[cpu];

	mips_cm_lock_other(cpu_cluster(d), cpu_core(d), cpu_vpe_id(d), block);
}

#endif /* __MIPS_ASM_MIPS_CM_H__ */

Filemanager

Name Type Size Permission Actions
dec Folder 0755
emma Folder 0755
fw Folder 0755
ip32 Folder 0755
lasat Folder 0755
mach-ar7 Folder 0755
mach-ath25 Folder 0755
mach-ath79 Folder 0755
mach-au1x00 Folder 0755
mach-bcm47xx Folder 0755
mach-bcm63xx Folder 0755
mach-bmips Folder 0755
mach-cavium-octeon Folder 0755
mach-cobalt Folder 0755
mach-db1x00 Folder 0755
mach-dec Folder 0755
mach-emma2rh Folder 0755
mach-generic Folder 0755
mach-ip22 Folder 0755
mach-ip27 Folder 0755
mach-ip28 Folder 0755
mach-ip32 Folder 0755
mach-jazz Folder 0755
mach-jz4740 Folder 0755
mach-lantiq Folder 0755
mach-lasat Folder 0755
mach-loongson32 Folder 0755
mach-loongson64 Folder 0755
mach-malta Folder 0755
mach-netlogic Folder 0755
mach-paravirt Folder 0755
mach-pic32 Folder 0755
mach-pistachio Folder 0755
mach-pmcs-msp71xx Folder 0755
mach-pnx833x Folder 0755
mach-ralink Folder 0755
mach-rc32434 Folder 0755
mach-rm Folder 0755
mach-sibyte Folder 0755
mach-tx39xx Folder 0755
mach-tx49xx Folder 0755
mach-vr41xx Folder 0755
mach-xilfpga Folder 0755
mips-boards Folder 0755
netlogic Folder 0755
octeon Folder 0755
pci Folder 0755
sgi Folder 0755
sibyte Folder 0755
sn Folder 0755
txx9 Folder 0755
vr41xx Folder 0755
xtalk Folder 0755
Kbuild File 577 B 0644
abi.h File 853 B 0644
addrspace.h File 4.1 KB 0644
amon.h File 409 B 0644
arch_hweight.h File 792 B 0644
asm-eva.h File 6.82 KB 0644
asm-offsets.h File 35 B 0644
asm-prototypes.h File 197 B 0644
asm.h File 8.47 KB 0644
asmmacro-32.h File 2.47 KB 0644
asmmacro-64.h File 1.22 KB 0644
asmmacro.h File 14.07 KB 0644
atomic.h File 19.73 KB 0644
barrier.h File 8.03 KB 0644
bcache.h File 2.04 KB 0644
bitops.h File 15.46 KB 0644
bitrev.h File 608 B 0644
bmips-spaces.h File 268 B 0644
bmips.h File 3.45 KB 0644
bootinfo.h File 5.08 KB 0644
branch.h File 2.35 KB 0644
break.h File 787 B 0644
bug.h File 759 B 0644
bugs.h File 944 B 0644
cache.h File 546 B 0644
cacheflush.h File 4.99 KB 0644
cacheops.h File 3.71 KB 0644
cdmm.h File 3.67 KB 0644
cevt-r4k.h File 823 B 0644
checksum.h File 6.43 KB 0644
clock.h File 997 B 0644
clocksource.h File 884 B 0644
cmp.h File 492 B 0644
cmpxchg.h File 5.28 KB 0644
compat-signal.h File 640 B 0644
compat.h File 6.66 KB 0644
compiler.h File 2.96 KB 0644
cop2.h File 1.77 KB 0644
cpu-features.h File 19.46 KB 0644
cpu-info.h File 5.84 KB 0644
cpu-type.h File 4.13 KB 0644
cpu.h File 15.54 KB 0644
cpufeature.h File 717 B 0644
debug.h File 654 B 0644
delay.h File 841 B 0644
device.h File 347 B 0644
div64.h File 2.17 KB 0644
dma-coherence.h File 813 B 0644
dma-mapping.h File 981 B 0644
dma.h File 9.92 KB 0644
ds1287.h File 1019 B 0644
dsemul.h File 3.24 KB 0644
dsp.h File 1.91 KB 0644
edac.h File 819 B 0644
elf.h File 15.04 KB 0644
errno.h File 429 B 0644
eva.h File 796 B 0644
exec.h File 579 B 0644
extable.h File 241 B 0644
fb.h File 372 B 0644
fixmap.h File 2.29 KB 0644
floppy.h File 1.57 KB 0644
fpregdef.h File 2.66 KB 0644
fpu.h File 5.21 KB 0644
fpu_emulator.h File 5.74 KB 0644
ftrace.h File 2.11 KB 0644
futex.h File 4.87 KB 0644
gio_device.h File 1.5 KB 0644
gt64120.h File 19.37 KB 0644
hardirq.h File 544 B 0644
hazards.h File 8.36 KB 0644
highmem.h File 1.72 KB 0644
hpet.h File 1.93 KB 0644
hugetlb.h File 2.76 KB 0644
hw_irq.h File 475 B 0644
i8259.h File 2.52 KB 0644
ide.h File 330 B 0644
idle.h File 689 B 0644
inst.h File 2.34 KB 0644
io.h File 18.44 KB 0644
irq.h File 2.26 KB 0644
irq_cpu.h File 708 B 0644
irq_gt641xx.h File 2.69 KB 0644
irq_regs.h File 744 B 0644
irqflags.h File 4.04 KB 0644
isa-rev.h File 556 B 0644
isadep.h File 603 B 0644
jazz.h File 8 KB 0644
jazzdma.h File 2.97 KB 0644
jump_label.h File 1.4 KB 0644
kdebug.h File 303 B 0644
kexec.h File 1.53 KB 0644
kgdb.h File 1.19 KB 0644
kmap_types.h File 221 B 0644
kprobes.h File 2.68 KB 0644
kvm_host.h File 37.88 KB 0644
kvm_para.h File 2.09 KB 0644
linkage.h File 306 B 0644
llsc.h File 623 B 0644
local.h File 4.99 KB 0644
m48t37.h File 732 B 0644
maar.h File 4.04 KB 0644
machine.h File 2.93 KB 0644
mc146818-time.h File 3.69 KB 0644
mc146818rtc.h File 450 B 0644
mips-cm.h File 15.86 KB 0644
mips-cpc.h File 5.83 KB 0644
mips-cps.h File 6.55 KB 0644
mips-gic.h File 12.3 KB 0644
mips-r2-to-r6-emul.h File 2.05 KB 0644
mips_machine.h File 1.32 KB 0644
mips_mt.h File 707 B 0644
mipsmtregs.h File 10.9 KB 0644
mipsprom.h File 2.1 KB 0644
mipsregs.h File 88.1 KB 0644
mmu.h File 550 B 0644
mmu_context.h File 5.41 KB 0644
mmzone.h File 561 B 0644
module.h File 4.45 KB 0644
msa.h File 8.01 KB 0644
msc01_ic.h File 6.55 KB 0644
nile4.h File 10.33 KB 0644
paccess.h File 3.07 KB 0644
page.h File 7.19 KB 0644
pci.h File 4.08 KB 0644
perf_event.h File 482 B 0644
pgalloc.h File 3.21 KB 0644
pgtable-32.h File 7.31 KB 0644
pgtable-64.h File 10.87 KB 0644
pgtable-bits.h File 7.36 KB 0644
pgtable.h File 17.34 KB 0644
pm-cps.h File 1.68 KB 0644
pm.h File 3.99 KB 0644
pmon.h File 1.64 KB 0644
prefetch.h File 2.1 KB 0644
processor.h File 11.71 KB 0644
prom.h File 845 B 0644
ptrace.h File 5.55 KB 0644
r4k-timer.h File 604 B 0644
r4kcache.h File 26.34 KB 0644
reboot.h File 440 B 0644
reg.h File 26 B 0644
regdef.h File 2.63 KB 0644
rtlx.h File 2.1 KB 0644
seccomp.h File 800 B 0644
serial.h File 607 B 0644
setup.h File 884 B 0644
sgialib.h File 2.45 KB 0644
sgiarcs.h File 15.32 KB 0644
shmparam.h File 352 B 0644
sigcontext.h File 1.04 KB 0644
signal.h File 1.02 KB 0644
sim.h File 2.32 KB 0644
smp-cps.h File 1.18 KB 0644
smp-ops.h File 2.33 KB 0644
smp.h File 3.31 KB 0644
sni.h File 7.27 KB 0644
socket.h File 1.34 KB 0644
sparsemem.h File 486 B 0644
spinlock.h File 459 B 0644
spinlock_types.h File 188 B 0644
spram.h File 262 B 0644
stackframe.h File 10.82 KB 0644
stackprotector.h File 1.15 KB 0644
stacktrace.h File 2.15 KB 0644
string.h File 2.94 KB 0644
switch_to.h File 4.19 KB 0644
syscall.h File 3.57 KB 0644
termios.h File 2.89 KB 0644
thread_info.h File 6.63 KB 0644
time.h File 2.13 KB 0644
timex.h File 2.87 KB 0644
tlb.h File 1.09 KB 0644
tlbdebug.h File 403 B 0644
tlbex.h File 788 B 0644
tlbflush.h File 1.67 KB 0644
tlbmisc.h File 320 B 0644
topology.h File 619 B 0644
traps.h File 1.25 KB 0644
txx9irq.h File 743 B 0644
txx9pio.h File 592 B 0644
txx9tmr.h File 1.59 KB 0644
types.h File 487 B 0644
uaccess.h File 22.2 KB 0644
uasm.h File 9.18 KB 0644
unistd.h File 1.9 KB 0644
uprobes.h File 1.11 KB 0644
vdso.h File 3.72 KB 0644
vga.h File 1.26 KB 0644
vpe.h File 2.7 KB 0644
war.h File 7.48 KB 0644
watch.h File 827 B 0644
wbflush.h File 694 B 0644
yamon-dt.h File 1.88 KB 0644