/* * arch/arm/include/asm/assembler.h * * Copyright (C) 1996-2000 Russell King * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This file contains arm architecture specific defines * for the different processors. * * Do not include any C declarations in this file - it is included by * assembler source. */ #ifndef __ASM_ASSEMBLER_H__ #define __ASM_ASSEMBLER_H__ #ifndef __ASSEMBLY__ #error "Only include this from assembly code" #endif #include <asm/ptrace.h> #include <asm/opcodes-virt.h> #include <asm/asm-offsets.h> #include <asm/page.h> #include <asm/thread_info.h> #include <asm/uaccess-asm.h> #define IOMEM(x) (x) /* * Endian independent macros for shifting bytes within registers. */ #ifndef __ARMEB__ #define lspull lsr #define lspush lsl #define get_byte_0 lsl #0 #define get_byte_1 lsr #8 #define get_byte_2 lsr #16 #define get_byte_3 lsr #24 #define put_byte_0 lsl #0 #define put_byte_1 lsl #8 #define put_byte_2 lsl #16 #define put_byte_3 lsl #24 #else #define lspull lsl #define lspush lsr #define get_byte_0 lsr #24 #define get_byte_1 lsr #16 #define get_byte_2 lsr #8 #define get_byte_3 lsl #0 #define put_byte_0 lsl #24 #define put_byte_1 lsl #16 #define put_byte_2 lsl #8 #define put_byte_3 lsl #0 #endif /* Select code for any configuration running in BE8 mode */ #ifdef CONFIG_CPU_ENDIAN_BE8 #define ARM_BE8(code...) code #else #define ARM_BE8(code...) #endif /* * Data preload for architectures that support it */ #if __LINUX_ARM_ARCH__ >= 5 #define PLD(code...) code #else #define PLD(code...) #endif /* * This can be used to enable code to cacheline align the destination * pointer when bulk writing to memory. Experiments on StrongARM and * XScale didn't show this a worthwhile thing to do when the cache is not * set to write-allocate (this would need further testing on XScale when WA * is used). * * On Feroceon there is much to gain however, regardless of cache mode. */ #ifdef CONFIG_CPU_FEROCEON #define CALGN(code...) code #else #define CALGN(code...) #endif #define IMM12_MASK 0xfff /* * Enable and disable interrupts */ #if __LINUX_ARM_ARCH__ >= 6 .macro disable_irq_notrace cpsid i .endm .macro enable_irq_notrace cpsie i .endm #else .macro disable_irq_notrace msr cpsr_c, #PSR_I_BIT | SVC_MODE .endm .macro enable_irq_notrace msr cpsr_c, #SVC_MODE .endm #endif #if __LINUX_ARM_ARCH__ < 7 .macro dsb, args mcr p15, 0, r0, c7, c10, 4 .endm .macro isb, args mcr p15, 0, r0, c7, c5, 4 .endm #endif .macro asm_trace_hardirqs_off, save=1 #if defined(CONFIG_TRACE_IRQFLAGS) .if \save stmdb sp!, {r0-r3, ip, lr} .endif bl trace_hardirqs_off .if \save ldmia sp!, {r0-r3, ip, lr} .endif #endif .endm .macro asm_trace_hardirqs_on, cond=al, save=1 #if defined(CONFIG_TRACE_IRQFLAGS) /* * actually the registers should be pushed and pop'd conditionally, but * after bl the flags are certainly clobbered */ .if \save stmdb sp!, {r0-r3, ip, lr} .endif bl\cond trace_hardirqs_on .if \save ldmia sp!, {r0-r3, ip, lr} .endif #endif .endm .macro disable_irq, save=1 disable_irq_notrace asm_trace_hardirqs_off \save .endm .macro enable_irq asm_trace_hardirqs_on enable_irq_notrace .endm /* * Save the current IRQ state and disable IRQs. Note that this macro * assumes FIQs are enabled, and that the processor is in SVC mode. */ .macro save_and_disable_irqs, oldcpsr #ifdef CONFIG_CPU_V7M mrs \oldcpsr, primask #else mrs \oldcpsr, cpsr #endif disable_irq .endm .macro save_and_disable_irqs_notrace, oldcpsr #ifdef CONFIG_CPU_V7M mrs \oldcpsr, primask #else mrs \oldcpsr, cpsr #endif disable_irq_notrace .endm /* * Restore interrupt state previously stored in a register. We don't * guarantee that this will preserve the flags. */ .macro restore_irqs_notrace, oldcpsr #ifdef CONFIG_CPU_V7M msr primask, \oldcpsr #else msr cpsr_c, \oldcpsr #endif .endm .macro restore_irqs, oldcpsr tst \oldcpsr, #PSR_I_BIT asm_trace_hardirqs_on cond=eq restore_irqs_notrace \oldcpsr .endm /* * Assembly version of "adr rd, BSYM(sym)". This should only be used to * reference local symbols in the same assembly file which are to be * resolved by the assembler. Other usage is undefined. */ .irp c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo .macro badr\c, rd, sym #ifdef CONFIG_THUMB2_KERNEL adr\c \rd, \sym + 1 #else adr\c \rd, \sym #endif .endm .endr /* * Get current thread_info. */ .macro get_thread_info, rd ARM( mov \rd, sp, lsr #THREAD_SIZE_ORDER + PAGE_SHIFT ) THUMB( mov \rd, sp ) THUMB( lsr \rd, \rd, #THREAD_SIZE_ORDER + PAGE_SHIFT ) mov \rd, \rd, lsl #THREAD_SIZE_ORDER + PAGE_SHIFT .endm /* * Increment/decrement the preempt count. */ #ifdef CONFIG_PREEMPT_COUNT .macro inc_preempt_count, ti, tmp ldr \tmp, [\ti, #TI_PREEMPT] @ get preempt count add \tmp, \tmp, #1 @ increment it str \tmp, [\ti, #TI_PREEMPT] .endm .macro dec_preempt_count, ti, tmp ldr \tmp, [\ti, #TI_PREEMPT] @ get preempt count sub \tmp, \tmp, #1 @ decrement it str \tmp, [\ti, #TI_PREEMPT] .endm .macro dec_preempt_count_ti, ti, tmp get_thread_info \ti dec_preempt_count \ti, \tmp .endm #else .macro inc_preempt_count, ti, tmp .endm .macro dec_preempt_count, ti, tmp .endm .macro dec_preempt_count_ti, ti, tmp .endm #endif #define USER(x...) \ 9999: x; \ .pushsection __ex_table,"a"; \ .align 3; \ .long 9999b,9001f; \ .popsection #ifdef CONFIG_SMP #define ALT_SMP(instr...) \ 9998: instr /* * Note: if you get assembler errors from ALT_UP() when building with * CONFIG_THUMB2_KERNEL, you almost certainly need to use * ALT_SMP( W(instr) ... ) */ #define ALT_UP(instr...) \ .pushsection ".alt.smp.init", "a" ;\ .long 9998b ;\ 9997: instr ;\ .if . - 9997b == 2 ;\ nop ;\ .endif ;\ .if . - 9997b != 4 ;\ .error "ALT_UP() content must assemble to exactly 4 bytes";\ .endif ;\ .popsection #define ALT_UP_B(label) \ .equ up_b_offset, label - 9998b ;\ .pushsection ".alt.smp.init", "a" ;\ .long 9998b ;\ W(b) . + up_b_offset ;\ .popsection #else #define ALT_SMP(instr...) #define ALT_UP(instr...) instr #define ALT_UP_B(label) b label #endif /* * Instruction barrier */ .macro instr_sync #if __LINUX_ARM_ARCH__ >= 7 isb #elif __LINUX_ARM_ARCH__ == 6 mcr p15, 0, r0, c7, c5, 4 #endif .endm /* * SMP data memory barrier */ .macro smp_dmb mode #ifdef CONFIG_SMP #if __LINUX_ARM_ARCH__ >= 7 .ifeqs "\mode","arm" ALT_SMP(dmb ish) .else ALT_SMP(W(dmb) ish) .endif #elif __LINUX_ARM_ARCH__ == 6 ALT_SMP(mcr p15, 0, r0, c7, c10, 5) @ dmb #else #error Incompatible SMP platform #endif .ifeqs "\mode","arm" ALT_UP(nop) .else ALT_UP(W(nop)) .endif #endif .endm #if defined(CONFIG_CPU_V7M) /* * setmode is used to assert to be in svc mode during boot. For v7-M * this is done in __v7m_setup, so setmode can be empty here. */ .macro setmode, mode, reg .endm #elif defined(CONFIG_THUMB2_KERNEL) .macro setmode, mode, reg mov \reg, #\mode msr cpsr_c, \reg .endm #else .macro setmode, mode, reg msr cpsr_c, #\mode .endm #endif /* * Helper macro to enter SVC mode cleanly and mask interrupts. reg is * a scratch register for the macro to overwrite. * * This macro is intended for forcing the CPU into SVC mode at boot time. * you cannot return to the original mode. */ .macro safe_svcmode_maskall reg:req #if __LINUX_ARM_ARCH__ >= 6 && !defined(CONFIG_CPU_V7M) mrs \reg , cpsr eor \reg, \reg, #HYP_MODE tst \reg, #MODE_MASK bic \reg , \reg , #MODE_MASK orr \reg , \reg , #PSR_I_BIT | PSR_F_BIT | SVC_MODE THUMB( orr \reg , \reg , #PSR_T_BIT ) bne 1f orr \reg, \reg, #PSR_A_BIT badr lr, 2f msr spsr_cxsf, \reg __MSR_ELR_HYP(14) __ERET 1: msr cpsr_c, \reg 2: #else /* * workaround for possibly broken pre-v6 hardware * (akita, Sharp Zaurus C-1000, PXA270-based) */ setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, \reg #endif .endm /* * STRT/LDRT access macros with ARM and Thumb-2 variants */ #ifdef CONFIG_THUMB2_KERNEL .macro usraccoff, instr, reg, ptr, inc, off, cond, abort, t=TUSER() 9999: .if \inc == 1 \instr\()b\t\cond\().w \reg, [\ptr, #\off] .elseif \inc == 4 \instr\t\cond\().w \reg, [\ptr, #\off] .else .error "Unsupported inc macro argument" .endif .pushsection __ex_table,"a" .align 3 .long 9999b, \abort .popsection .endm .macro usracc, instr, reg, ptr, inc, cond, rept, abort @ explicit IT instruction needed because of the label @ introduced by the USER macro .ifnc \cond,al .if \rept == 1 itt \cond .elseif \rept == 2 ittt \cond .else .error "Unsupported rept macro argument" .endif .endif @ Slightly optimised to avoid incrementing the pointer twice usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort .if \rept == 2 usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort .endif add\cond \ptr, #\rept * \inc .endm #else /* !CONFIG_THUMB2_KERNEL */ .macro usracc, instr, reg, ptr, inc, cond, rept, abort, t=TUSER() .rept \rept 9999: .if \inc == 1 \instr\()b\t\cond \reg, [\ptr], #\inc .elseif \inc == 4 \instr\t\cond \reg, [\ptr], #\inc .else .error "Unsupported inc macro argument" .endif .pushsection __ex_table,"a" .align 3 .long 9999b, \abort .popsection .endr .endm #endif /* CONFIG_THUMB2_KERNEL */ .macro strusr, reg, ptr, inc, cond=al, rept=1, abort=9001f usracc str, \reg, \ptr, \inc, \cond, \rept, \abort .endm .macro ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f usracc ldr, \reg, \ptr, \inc, \cond, \rept, \abort .endm /* Utility macro for declaring string literals */ .macro string name:req, string .type \name , #object \name: .asciz "\string" .size \name , . - \name .endm .irp c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo .macro ret\c, reg #if __LINUX_ARM_ARCH__ < 6 mov\c pc, \reg #else .ifeqs "\reg", "lr" bx\c \reg .else mov\c pc, \reg .endif #endif .endm .endr .macro ret.w, reg ret \reg #ifdef CONFIG_THUMB2_KERNEL nop #endif .endm .macro bug, msg, line #ifdef CONFIG_THUMB2_KERNEL 1: .inst 0xde02 #else 1: .inst 0xe7f001f2 #endif #ifdef CONFIG_DEBUG_BUGVERBOSE .pushsection .rodata.str, "aMS", %progbits, 1 2: .asciz "\msg" .popsection .pushsection __bug_table, "aw" .align 2 .word 1b, 2b .hword \line .popsection #endif .endm #ifdef CONFIG_KPROBES #define _ASM_NOKPROBE(entry) \ .pushsection "_kprobe_blacklist", "aw" ; \ .balign 4 ; \ .long entry; \ .popsection #else #define _ASM_NOKPROBE(entry) #endif #endif /* __ASM_ASSEMBLER_H__ */
Name | Type | Size | Permission | Actions |
---|---|---|---|---|
hardware | Folder | 0755 |
|
|
mach | Folder | 0755 |
|
|
xen | Folder | 0755 |
|
|
Kbuild | File | 568 B | 0644 |
|
arch_gicv3.h | File | 9.05 KB | 0644 |
|
arch_timer.h | File | 2.48 KB | 0644 |
|
arm-cci.h | File | 1.05 KB | 0644 |
|
asm-offsets.h | File | 35 B | 0644 |
|
assembler.h | File | 10.46 KB | 0644 |
|
atomic.h | File | 13.22 KB | 0644 |
|
auxvec.h | File | 29 B | 0644 |
|
bL_switcher.h | File | 2.28 KB | 0644 |
|
barrier.h | File | 2.84 KB | 0644 |
|
bitops.h | File | 8.62 KB | 0644 |
|
bitrev.h | File | 451 B | 0644 |
|
bug.h | File | 2.46 KB | 0644 |
|
bugs.h | File | 546 B | 0644 |
|
cache.h | File | 813 B | 0644 |
|
cacheflush.h | File | 15.54 KB | 0644 |
|
cachetype.h | File | 2.71 KB | 0644 |
|
checksum.h | File | 3.71 KB | 0644 |
|
clocksource.h | File | 153 B | 0644 |
|
cmpxchg.h | File | 6.14 KB | 0644 |
|
compiler.h | File | 978 B | 0644 |
|
cp15.h | File | 3.84 KB | 0644 |
|
cpu.h | File | 533 B | 0644 |
|
cpufeature.h | File | 1.4 KB | 0644 |
|
cpuidle.h | File | 1.33 KB | 0644 |
|
cputype.h | File | 8.42 KB | 0644 |
|
cti.h | File | 3.62 KB | 0644 |
|
dcc.h | File | 1.01 KB | 0644 |
|
delay.h | File | 2.83 KB | 0644 |
|
device.h | File | 771 B | 0644 |
|
div64.h | File | 3.17 KB | 0644 |
|
dma-contiguous.h | File | 265 B | 0644 |
|
dma-iommu.h | File | 1.01 KB | 0644 |
|
dma-mapping.h | File | 7.44 KB | 0644 |
|
dma.h | File | 4.18 KB | 0644 |
|
dmi.h | File | 528 B | 0644 |
|
domain.h | File | 3.65 KB | 0644 |
|
ecard.h | File | 5.98 KB | 0644 |
|
edac.h | File | 1.51 KB | 0644 |
|
efi.h | File | 3.04 KB | 0644 |
|
elf.h | File | 4.52 KB | 0644 |
|
entry-macro-multi.S | File | 726 B | 0644 |
|
exception.h | File | 571 B | 0644 |
|
fb.h | File | 375 B | 0644 |
|
fiq.h | File | 1.36 KB | 0644 |
|
firmware.h | File | 1.82 KB | 0644 |
|
fixmap.h | File | 1.84 KB | 0644 |
|
flat.h | File | 915 B | 0644 |
|
floppy.h | File | 3.61 KB | 0644 |
|
fncpy.h | File | 3.08 KB | 0644 |
|
fpstate.h | File | 1.73 KB | 0644 |
|
ftrace.h | File | 1.92 KB | 0644 |
|
futex.h | File | 4.24 KB | 0644 |
|
glue-cache.h | File | 3.51 KB | 0644 |
|
glue-df.h | File | 2.2 KB | 0644 |
|
glue-pf.h | File | 1.12 KB | 0644 |
|
glue-proc.h | File | 4.46 KB | 0644 |
|
glue.h | File | 759 B | 0644 |
|
gpio.h | File | 693 B | 0644 |
|
hardirq.h | File | 803 B | 0644 |
|
highmem.h | File | 2.15 KB | 0644 |
|
hugetlb-3level.h | File | 2.03 KB | 0644 |
|
hugetlb.h | File | 1.78 KB | 0644 |
|
hw_breakpoint.h | File | 3.53 KB | 0644 |
|
hw_irq.h | File | 349 B | 0644 |
|
hwcap.h | File | 378 B | 0644 |
|
hypervisor.h | File | 140 B | 0644 |
|
ide.h | File | 566 B | 0644 |
|
idmap.h | File | 355 B | 0644 |
|
insn.h | File | 636 B | 0644 |
|
io.h | File | 15.96 KB | 0644 |
|
irq.h | File | 1015 B | 0644 |
|
irq_work.h | File | 234 B | 0644 |
|
irqflags.h | File | 3.88 KB | 0644 |
|
jump_label.h | File | 1009 B | 0644 |
|
kexec-internal.h | File | 272 B | 0644 |
|
kexec.h | File | 2.3 KB | 0644 |
|
kgdb.h | File | 2.72 KB | 0644 |
|
kmap_types.h | File | 190 B | 0644 |
|
kprobes.h | File | 2.65 KB | 0644 |
|
kvm_arm.h | File | 7.6 KB | 0644 |
|
kvm_asm.h | File | 2.84 KB | 0644 |
|
kvm_coproc.h | File | 1.99 KB | 0644 |
|
kvm_emulate.h | File | 7.84 KB | 0644 |
|
kvm_host.h | File | 10.31 KB | 0644 |
|
kvm_hyp.h | File | 4.49 KB | 0644 |
|
kvm_mmio.h | File | 1.34 KB | 0644 |
|
kvm_mmu.h | File | 7.27 KB | 0644 |
|
limits.h | File | 166 B | 0644 |
|
linkage.h | File | 216 B | 0644 |
|
mc146818rtc.h | File | 720 B | 0644 |
|
mcpm.h | File | 11.92 KB | 0644 |
|
mcs_spinlock.h | File | 570 B | 0644 |
|
memblock.h | File | 248 B | 0644 |
|
memory.h | File | 9.95 KB | 0644 |
|
mmu.h | File | 953 B | 0644 |
|
mmu_context.h | File | 3.94 KB | 0644 |
|
module.h | File | 1.57 KB | 0644 |
|
mpu.h | File | 2.15 KB | 0644 |
|
mtd-xip.h | File | 666 B | 0644 |
|
neon.h | File | 1.16 KB | 0644 |
|
nwflash.h | File | 252 B | 0644 |
|
opcodes-sec.h | File | 742 B | 0644 |
|
opcodes-virt.h | File | 1.32 KB | 0644 |
|
opcodes.h | File | 8.07 KB | 0644 |
|
outercache.h | File | 3.78 KB | 0644 |
|
page-nommu.h | File | 957 B | 0644 |
|
page.h | File | 3.61 KB | 0644 |
|
paravirt.h | File | 454 B | 0644 |
|
patch.h | File | 438 B | 0644 |
|
pci.h | File | 956 B | 0644 |
|
percpu.h | File | 1.56 KB | 0644 |
|
perf_event.h | File | 857 B | 0644 |
|
pgalloc.h | File | 3.79 KB | 0644 |
|
pgtable-2level-hwdef.h | File | 3.45 KB | 0644 |
|
pgtable-2level-types.h | File | 1.84 KB | 0644 |
|
pgtable-2level.h | File | 8.51 KB | 0644 |
|
pgtable-3level-hwdef.h | File | 3.95 KB | 0644 |
|
pgtable-3level-types.h | File | 1.89 KB | 0644 |
|
pgtable-3level.h | File | 9.54 KB | 0644 |
|
pgtable-hwdef.h | File | 467 B | 0644 |
|
pgtable-nommu.h | File | 2.51 KB | 0644 |
|
pgtable.h | File | 11.71 KB | 0644 |
|
probes.h | File | 1.73 KB | 0644 |
|
proc-fns.h | File | 4.79 KB | 0644 |
|
processor.h | File | 3.4 KB | 0644 |
|
procinfo.h | File | 1.27 KB | 0644 |
|
prom.h | File | 715 B | 0644 |
|
psci.h | File | 771 B | 0644 |
|
ptrace.h | File | 4.89 KB | 0644 |
|
sections.h | File | 189 B | 0644 |
|
set_memory.h | File | 1.04 KB | 0644 |
|
setup.h | File | 934 B | 0644 |
|
shmparam.h | File | 419 B | 0644 |
|
signal.h | File | 500 B | 0644 |
|
smp.h | File | 3.1 KB | 0644 |
|
smp_plat.h | File | 2.48 KB | 0644 |
|
smp_scu.h | File | 1.32 KB | 0644 |
|
smp_twd.h | File | 908 B | 0644 |
|
sparsemem.h | File | 716 B | 0644 |
|
spectre.h | File | 906 B | 0644 |
|
spinlock.h | File | 5.49 KB | 0644 |
|
spinlock_types.h | File | 541 B | 0644 |
|
stackprotector.h | File | 1.09 KB | 0644 |
|
stacktrace.h | File | 742 B | 0644 |
|
stage2_pgtable.h | File | 2.12 KB | 0644 |
|
string.h | File | 1.43 KB | 0644 |
|
suspend.h | File | 369 B | 0644 |
|
swab.h | File | 1005 B | 0644 |
|
switch_to.h | File | 1.03 KB | 0644 |
|
sync_bitops.h | File | 1.03 KB | 0644 |
|
syscall.h | File | 2.48 KB | 0644 |
|
system_info.h | File | 763 B | 0644 |
|
system_misc.h | File | 1.14 KB | 0644 |
|
tcm.h | File | 937 B | 0644 |
|
therm.h | File | 655 B | 0644 |
|
thread_info.h | File | 5.2 KB | 0644 |
|
thread_notify.h | File | 1.2 KB | 0644 |
|
timex.h | File | 577 B | 0644 |
|
tlb.h | File | 7.37 KB | 0644 |
|
tlbflush.h | File | 17.88 KB | 0644 |
|
tls.h | File | 3.09 KB | 0644 |
|
topology.h | File | 1.18 KB | 0644 |
|
traps.h | File | 1.17 KB | 0644 |
|
trusted_foundations.h | File | 2.29 KB | 0644 |
|
uaccess-asm.h | File | 2.83 KB | 0644 |
|
uaccess.h | File | 16.22 KB | 0644 |
|
ucontext.h | File | 2.98 KB | 0644 |
|
unaligned.h | File | 846 B | 0644 |
|
unified.h | File | 1.61 KB | 0644 |
|
unistd.h | File | 1.68 KB | 0644 |
|
unwind.h | File | 1.71 KB | 0644 |
|
uprobes.h | File | 1.07 KB | 0644 |
|
user.h | File | 4.2 KB | 0644 |
|
v7m.h | File | 2.93 KB | 0644 |
|
vdso.h | File | 507 B | 0644 |
|
vdso_datapage.h | File | 1.69 KB | 0644 |
|
vfp.h | File | 2.86 KB | 0644 |
|
vfpmacros.h | File | 2.1 KB | 0644 |
|
vga.h | File | 305 B | 0644 |
|
virt.h | File | 2.9 KB | 0644 |
|
word-at-a-time.h | File | 2.08 KB | 0644 |
|
xor.h | File | 5.22 KB | 0644 |
|