/* * bfin_dma.h - Blackfin DMA defines/structures/etc... * * Copyright 2004-2010 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ #ifndef __ASM_BFIN_DMA_H__ #define __ASM_BFIN_DMA_H__ #include <linux/types.h> /* DMA_CONFIG Masks */ #define DMAEN 0x0001 /* DMA Channel Enable */ #define WNR 0x0002 /* Channel Direction (W/R*) */ #define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ #define PSIZE_8 0x00000000 /* Transfer Word Size = 16 */ #ifdef CONFIG_BF60x #define PSIZE_16 0x00000010 /* Transfer Word Size = 16 */ #define PSIZE_32 0x00000020 /* Transfer Word Size = 32 */ #define PSIZE_64 0x00000030 /* Transfer Word Size = 32 */ #define WDSIZE_16 0x00000100 /* Transfer Word Size = 16 */ #define WDSIZE_32 0x00000200 /* Transfer Word Size = 32 */ #define WDSIZE_64 0x00000300 /* Transfer Word Size = 32 */ #define WDSIZE_128 0x00000400 /* Transfer Word Size = 32 */ #define WDSIZE_256 0x00000500 /* Transfer Word Size = 32 */ #define DMA2D 0x04000000 /* DMA Mode (2D/1D*) */ #define RESTART 0x00000004 /* DMA Buffer Clear SYNC */ #define DI_EN_X 0x00100000 /* Data Interrupt Enable in X count */ #define DI_EN_Y 0x00200000 /* Data Interrupt Enable in Y count */ #define DI_EN_P 0x00300000 /* Data Interrupt Enable in Peripheral */ #define DI_EN DI_EN_X /* Data Interrupt Enable */ #define NDSIZE_0 0x00000000 /* Next Descriptor Size = 1 */ #define NDSIZE_1 0x00010000 /* Next Descriptor Size = 2 */ #define NDSIZE_2 0x00020000 /* Next Descriptor Size = 3 */ #define NDSIZE_3 0x00030000 /* Next Descriptor Size = 4 */ #define NDSIZE_4 0x00040000 /* Next Descriptor Size = 5 */ #define NDSIZE_5 0x00050000 /* Next Descriptor Size = 6 */ #define NDSIZE_6 0x00060000 /* Next Descriptor Size = 7 */ #define NDSIZE 0x00070000 /* Next Descriptor Size */ #define NDSIZE_OFFSET 16 /* Next Descriptor Size Offset */ #define DMAFLOW_LIST 0x00004000 /* Descriptor List Mode */ #define DMAFLOW_LARGE DMAFLOW_LIST #define DMAFLOW_ARRAY 0x00005000 /* Descriptor Array Mode */ #define DMAFLOW_LIST_DEMAND 0x00006000 /* Descriptor Demand List Mode */ #define DMAFLOW_ARRAY_DEMAND 0x00007000 /* Descriptor Demand Array Mode */ #define DMA_RUN_DFETCH 0x00000100 /* DMA Channel Running Indicator (DFETCH) */ #define DMA_RUN 0x00000200 /* DMA Channel Running Indicator */ #define DMA_RUN_WAIT_TRIG 0x00000300 /* DMA Channel Running Indicator (WAIT TRIG) */ #define DMA_RUN_WAIT_ACK 0x00000400 /* DMA Channel Running Indicator (WAIT ACK) */ #else #define PSIZE_16 0x0000 /* Transfer Word Size = 16 */ #define PSIZE_32 0x0000 /* Transfer Word Size = 32 */ #define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ #define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ #define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ #define RESTART 0x0020 /* DMA Buffer Clear */ #define DI_SEL 0x0040 /* Data Interrupt Timing Select */ #define DI_EN 0x0080 /* Data Interrupt Enable */ #define DI_EN_X 0x00C0 /* Data Interrupt Enable in X count*/ #define DI_EN_Y 0x0080 /* Data Interrupt Enable in Y count*/ #define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ #define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ #define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ #define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ #define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ #define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ #define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ #define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ #define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ #define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ #define NDSIZE 0x0f00 /* Next Descriptor Size */ #define NDSIZE_OFFSET 8 /* Next Descriptor Size Offset */ #define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ #define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ #define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ #define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ #define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ #endif #define DMAFLOW 0x7000 /* Flow Control */ #define DMAFLOW_STOP 0x0000 /* Stop Mode */ #define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ /* DMA_IRQ_STATUS Masks */ #define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ #define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ #ifdef CONFIG_BF60x #define DMA_PIRQ 0x0004 /* DMA Peripheral Error Interrupt Status */ #else #define DMA_PIRQ 0 #endif /* * All Blackfin system MMRs are padded to 32bits even if the register * itself is only 16bits. So use a helper macro to streamline this. */ #define __BFP(m) u16 m; u16 __pad_##m /* * bfin dma registers layout */ struct bfin_dma_regs { u32 next_desc_ptr; u32 start_addr; #ifdef CONFIG_BF60x u32 cfg; u32 x_count; u32 x_modify; u32 y_count; u32 y_modify; u32 pad1; u32 pad2; u32 curr_desc_ptr; u32 prev_desc_ptr; u32 curr_addr; u32 irq_status; u32 curr_x_count; u32 curr_y_count; u32 pad3; u32 bw_limit_count; u32 curr_bw_limit_count; u32 bw_monitor_count; u32 curr_bw_monitor_count; #else __BFP(config); u32 __pad0; __BFP(x_count); __BFP(x_modify); __BFP(y_count); __BFP(y_modify); u32 curr_desc_ptr; u32 curr_addr; __BFP(irq_status); __BFP(peripheral_map); __BFP(curr_x_count); u32 __pad1; __BFP(curr_y_count); u32 __pad2; #endif }; #ifndef CONFIG_BF60x /* * bfin handshake mdma registers layout */ struct bfin_hmdma_regs { __BFP(control); __BFP(ecinit); __BFP(bcinit); __BFP(ecurgent); __BFP(ecoverflow); __BFP(ecount); __BFP(bcount); }; #endif #undef __BFP #endif
Name | Type | Size | Permission | Actions |
---|---|---|---|---|
Kbuild | File | 658 B | 0644 |
|
asm-offsets.h | File | 35 B | 0644 |
|
atomic.h | File | 1.55 KB | 0644 |
|
barrier.h | File | 2.55 KB | 0644 |
|
bfin-global.h | File | 2.8 KB | 0644 |
|
bfin-lq035q1.h | File | 868 B | 0644 |
|
bfin5xx_spi.h | File | 2.07 KB | 0644 |
|
bfin_can.h | File | 36.04 KB | 0644 |
|
bfin_dma.h | File | 5.46 KB | 0644 |
|
bfin_pfmon.h | File | 1.11 KB | 0644 |
|
bfin_ppi.h | File | 9.01 KB | 0644 |
|
bfin_sdh.h | File | 7.2 KB | 0644 |
|
bfin_serial.h | File | 17.02 KB | 0644 |
|
bfin_simple_timer.h | File | 949 B | 0644 |
|
bfin_sport.h | File | 1.21 KB | 0644 |
|
bfin_sport3.h | File | 5.47 KB | 0644 |
|
bfin_twi.h | File | 6.25 KB | 0644 |
|
bfin_watchdog.h | File | 696 B | 0644 |
|
bfrom.h | File | 3.36 KB | 0644 |
|
bitops.h | File | 3.45 KB | 0644 |
|
blackfin.h | File | 1.55 KB | 0644 |
|
bug.h | File | 1.49 KB | 0644 |
|
cache.h | File | 1.47 KB | 0644 |
|
cacheflush.h | File | 3.79 KB | 0644 |
|
cdef_LPBlackfin.h | File | 18.93 KB | 0644 |
|
checksum.h | File | 899 B | 0644 |
|
clkdev.h | File | 318 B | 0644 |
|
clocks.h | File | 1.66 KB | 0644 |
|
cmpxchg.h | File | 3.2 KB | 0644 |
|
context.S | File | 5.92 KB | 0644 |
|
cplb.h | File | 4.86 KB | 0644 |
|
cplbinit.h | File | 1.6 KB | 0644 |
|
cpu.h | File | 443 B | 0644 |
|
def_LPBlackfin.h | File | 28.6 KB | 0644 |
|
delay.h | File | 917 B | 0644 |
|
dma-mapping.h | File | 1.09 KB | 0644 |
|
dma.h | File | 9.28 KB | 0644 |
|
dpmc.h | File | 18.24 KB | 0644 |
|
early_printk.h | File | 1.09 KB | 0644 |
|
elf.h | File | 4.88 KB | 0644 |
|
entry.h | File | 5.27 KB | 0644 |
|
exec.h | File | 37 B | 0644 |
|
fixed_code.h | File | 806 B | 0644 |
|
flat.h | File | 1.41 KB | 0644 |
|
ftrace.h | File | 1.37 KB | 0644 |
|
gpio.h | File | 5.91 KB | 0644 |
|
gptimers.h | File | 8.95 KB | 0644 |
|
hardirq.h | File | 301 B | 0644 |
|
io.h | File | 1.52 KB | 0644 |
|
ipipe.h | File | 5.81 KB | 0644 |
|
ipipe_base.h | File | 2.38 KB | 0644 |
|
irq.h | File | 879 B | 0644 |
|
irq_handler.h | File | 1.93 KB | 0644 |
|
irqflags.h | File | 7.13 KB | 0644 |
|
kgdb.h | File | 3.23 KB | 0644 |
|
l1layout.h | File | 879 B | 0644 |
|
linkage.h | File | 205 B | 0644 |
|
mem_init.h | File | 13.1 KB | 0644 |
|
mem_map.h | File | 1.73 KB | 0644 |
|
mmu.h | File | 713 B | 0644 |
|
mmu_context.h | File | 5.35 KB | 0644 |
|
module.h | File | 410 B | 0644 |
|
nand.h | File | 895 B | 0644 |
|
nmi.h | File | 195 B | 0644 |
|
page.h | File | 546 B | 0644 |
|
page_offset.h | File | 192 B | 0644 |
|
pci.h | File | 310 B | 0644 |
|
pda.h | File | 1.86 KB | 0644 |
|
perf_event.h | File | 23 B | 0644 |
|
pgtable.h | File | 3 KB | 0644 |
|
pm.h | File | 590 B | 0644 |
|
portmux.h | File | 16.38 KB | 0644 |
|
processor.h | File | 3.21 KB | 0644 |
|
pseudo_instructions.h | File | 391 B | 0644 |
|
ptrace.h | File | 1.19 KB | 0644 |
|
reboot.h | File | 446 B | 0644 |
|
rwlock.h | File | 142 B | 0644 |
|
scb.h | File | 445 B | 0644 |
|
sections.h | File | 2 KB | 0644 |
|
segment.h | File | 226 B | 0644 |
|
smp.h | File | 1.34 KB | 0644 |
|
spinlock.h | File | 1.87 KB | 0644 |
|
spinlock_types.h | File | 495 B | 0644 |
|
string.h | File | 1.04 KB | 0644 |
|
switch_to.h | File | 997 B | 0644 |
|
syscall.h | File | 2.15 KB | 0644 |
|
thread_info.h | File | 2.66 KB | 0644 |
|
time.h | File | 1.33 KB | 0644 |
|
timex.h | File | 477 B | 0644 |
|
tlb.h | File | 481 B | 0644 |
|
tlbflush.h | File | 88 B | 0644 |
|
trace.h | File | 2.67 KB | 0644 |
|
traps.h | File | 4.87 KB | 0644 |
|
uaccess.h | File | 5.79 KB | 0644 |
|
unistd.h | File | 523 B | 0644 |
|
vga.h | File | 29 B | 0644 |
|