404

[ Avaa Bypassed ]




Upload:

Command:

botdev@18.217.203.133: ~ $
/*
 * Copyright 2008 Analog Devices Inc.
 *
 * Licensed under the GPL-2 or later.
 */

#ifndef __MACH_BF518_H__
#define __MACH_BF518_H__

#define OFFSET_(x) ((x) & 0x0000FFFF)

/*some misc defines*/
#define IMASK_IVG15		0x8000
#define IMASK_IVG14		0x4000
#define IMASK_IVG13		0x2000
#define IMASK_IVG12		0x1000

#define IMASK_IVG11		0x0800
#define IMASK_IVG10		0x0400
#define IMASK_IVG9		0x0200
#define IMASK_IVG8		0x0100

#define IMASK_IVG7		0x0080
#define IMASK_IVGTMR		0x0040
#define IMASK_IVGHW		0x0020

/***************************/

#define BFIN_DSUBBANKS	4
#define BFIN_DWAYS		2
#define BFIN_DLINES		64
#define BFIN_ISUBBANKS	4
#define BFIN_IWAYS		4
#define BFIN_ILINES		32

#define WAY0_L			0x1
#define WAY1_L			0x2
#define WAY01_L			0x3
#define WAY2_L			0x4
#define WAY02_L			0x5
#define	WAY12_L			0x6
#define	WAY012_L		0x7

#define	WAY3_L			0x8
#define	WAY03_L			0x9
#define	WAY13_L			0xA
#define	WAY013_L		0xB

#define	WAY32_L			0xC
#define	WAY320_L		0xD
#define	WAY321_L		0xE
#define	WAYALL_L		0xF

#define DMC_ENABLE (2<<2)	/*yes, 2, not 1 */

/********************************* EBIU Settings ************************************/
#define AMBCTL0VAL	((CONFIG_BANK_1 << 16) | CONFIG_BANK_0)
#define AMBCTL1VAL	((CONFIG_BANK_3 << 16) | CONFIG_BANK_2)

#ifdef CONFIG_C_AMBEN_ALL
#define V_AMBEN AMBEN_ALL
#endif
#ifdef CONFIG_C_AMBEN
#define V_AMBEN 0x0
#endif
#ifdef CONFIG_C_AMBEN_B0
#define V_AMBEN AMBEN_B0
#endif
#ifdef CONFIG_C_AMBEN_B0_B1
#define V_AMBEN AMBEN_B0_B1
#endif
#ifdef CONFIG_C_AMBEN_B0_B1_B2
#define V_AMBEN AMBEN_B0_B1_B2
#endif
#ifdef CONFIG_C_AMCKEN
#define V_AMCKEN AMCKEN
#else
#define V_AMCKEN 0x0
#endif
#ifdef CONFIG_C_CDPRIO
#define V_CDPRIO 0x100
#else
#define V_CDPRIO 0x0
#endif

#define AMGCTLVAL	(V_AMBEN | V_AMCKEN | V_CDPRIO)

/**************************** Hysteresis Settings ****************************/

#ifdef CONFIG_BFIN_HYSTERESIS_CONTROL
#ifdef CONFIG_GPIO_HYST_PORTF_0_7
#define HYST_PORTF_0_7		(1 << 0)
#else
#define HYST_PORTF_0_7		(0 << 0)
#endif
#ifdef CONFIG_GPIO_HYST_PORTF_8_9
#define HYST_PORTF_8_9		(1 << 2)
#else
#define HYST_PORTF_8_9		(0 << 2)
#endif
#ifdef CONFIG_GPIO_HYST_PORTF_10
#define HYST_PORTF_10		(1 << 4)
#else
#define HYST_PORTF_10		(0 << 4)
#endif
#ifdef CONFIG_GPIO_HYST_PORTF_11
#define HYST_PORTF_11		(1 << 6)
#else
#define HYST_PORTF_11		(0 << 6)
#endif
#ifdef CONFIG_GPIO_HYST_PORTF_12_13
#define HYST_PORTF_12_13	(1 << 8)
#else
#define HYST_PORTF_12_13	(0 << 8)
#endif
#ifdef CONFIG_GPIO_HYST_PORTF_14_15
#define HYST_PORTF_14_15	(1 << 10)
#else
#define HYST_PORTF_14_15	(0 << 10)
#endif

#define HYST_PORTF_0_15	(HYST_PORTF_0_7 | HYST_PORTF_8_9 | HYST_PORTF_10 | \
		HYST_PORTF_11 | HYST_PORTF_12_13 | HYST_PORTF_14_15)

#ifdef CONFIG_GPIO_HYST_PORTG_0
#define HYST_PORTG_0		(1 << 0)
#else
#define HYST_PORTG_0		(0 << 0)
#endif
#ifdef CONFIG_GPIO_HYST_PORTG_1_4
#define HYST_PORTG_1_4		(1 << 2)
#else
#define HYST_PORTG_1_4		(0 << 2)
#endif
#ifdef CONFIG_GPIO_HYST_PORTG_5_6
#define HYST_PORTG_5_6		(1 << 4)
#else
#define HYST_PORTG_5_6		(0 << 4)
#endif
#ifdef CONFIG_GPIO_HYST_PORTG_7_8
#define HYST_PORTG_7_8		(1 << 6)
#else
#define HYST_PORTG_7_8		(0 << 6)
#endif
#ifdef CONFIG_GPIO_HYST_PORTG_9
#define HYST_PORTG_9		(1 << 8)
#else
#define HYST_PORTG_9		(0 << 8)
#endif
#ifdef CONFIG_GPIO_HYST_PORTG_10
#define HYST_PORTG_10		(1 << 10)
#else
#define HYST_PORTG_10		(0 << 10)
#endif
#ifdef CONFIG_GPIO_HYST_PORTG_11_13
#define HYST_PORTG_11_13	(1 << 12)
#else
#define HYST_PORTG_11_13	(0 << 12)
#endif
#ifdef CONFIG_GPIO_HYST_PORTG_14_15
#define HYST_PORTG_14_15	(1 << 14)
#else
#define HYST_PORTG_14_15	(0 << 14)
#endif

#define HYST_PORTG_0_15	(HYST_PORTG_0 | HYST_PORTG_1_4 | HYST_PORTG_5_6 | \
		HYST_PORTG_7_8 | HYST_PORTG_9 | HYST_PORTG_10 | \
		HYST_PORTG_11_13 | HYST_PORTG_14_15)

#ifdef CONFIG_GPIO_HYST_PORTH_0_7
#define HYST_PORTH_0_7		(1 << 0)
#else
#define HYST_PORTH_0_7		(0 << 0)
#endif

#define HYST_PORTH_0_15	(HYST_PORTH_0_7)

#ifdef CONFIG_NONEGPIO_HYST_NMI_RST_BMODE
#define HYST_NMI_RST_BMODE		(1 << 2)
#else
#define HYST_NMI_RST_BMODE		(0 << 2)
#endif
#ifdef CONFIG_NONEGPIO_HYST_JTAG
#define HYST_JTAG			(1 << 4)
#else
#define HYST_JTAG			(0 << 4)
#endif

#define HYST_NONEGPIO	(HYST_NMI_RST_BMODE | HYST_JTAG)
#define HYST_NONEGPIO_MASK		(0x3C)
#endif /* CONFIG_BFIN_HYSTERESIS_CONTROL */

#ifdef CONFIG_BF518
#define CPU "BF518"
#define CPUID 0x27e8
#endif
#ifdef CONFIG_BF516
#define CPU "BF516"
#define CPUID 0x27e8
#endif
#ifdef CONFIG_BF514
#define CPU "BF514"
#define CPUID 0x27e8
#endif
#ifdef CONFIG_BF512
#define CPU "BF512"
#define CPUID 0x27e8
#endif

#ifndef CPU
#error "Unknown CPU type - This kernel doesn't seem to be configured properly"
#endif

#endif				/* __MACH_BF518_H__  */

Filemanager

Name Type Size Permission Actions
anomaly.h File 6.54 KB 0644
bf518.h File 4.6 KB 0644
bfin_serial.h File 252 B 0644
blackfin.h File 705 B 0644
cdefBF512.h File 63.63 KB 0644
cdefBF514.h File 4.47 KB 0644
cdefBF516.h File 10.83 KB 0644
cdefBF518.h File 3.37 KB 0644
defBF512.h File 81.71 KB 0644
defBF514.h File 2.84 KB 0644
defBF516.h File 32.55 KB 0644
defBF518.h File 3.76 KB 0644
dma.h File 1015 B 0644
gpio.h File 1.16 KB 0644
irq.h File 6.54 KB 0644
mem_map.h File 1.77 KB 0644
pll.h File 29 B 0644
portmux.h File 9.16 KB 0644