404

[ Avaa Bypassed ]




Upload:

Command:

botdev@18.221.83.96: ~ $
/*
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (c) 2001-2005 Silicon Graphics, Inc.  All rights reserved.
 */

#ifndef _ASM_IA64_SN_SHUB_MMR_H
#define _ASM_IA64_SN_SHUB_MMR_H

/* ==================================================================== */
/*                        Register "SH_IPI_INT"                         */
/*               SHub Inter-Processor Interrupt Registers               */
/* ==================================================================== */
#define SH1_IPI_INT			__IA64_UL_CONST(0x0000000110000380)
#define SH2_IPI_INT			__IA64_UL_CONST(0x0000000010000380)

/*   SH_IPI_INT_TYPE                                                    */
/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
#define SH_IPI_INT_TYPE_SHFT				0
#define SH_IPI_INT_TYPE_MASK		__IA64_UL_CONST(0x0000000000000007)

/*   SH_IPI_INT_AGT                                                     */
/*   Description:  Agent, must be 0 for SHub                            */
#define SH_IPI_INT_AGT_SHFT				3
#define SH_IPI_INT_AGT_MASK		__IA64_UL_CONST(0x0000000000000008)

/*   SH_IPI_INT_PID                                                     */
/*   Description:  Processor ID, same setting as on targeted McKinley  */
#define SH_IPI_INT_PID_SHFT                      	4
#define SH_IPI_INT_PID_MASK		__IA64_UL_CONST(0x00000000000ffff0)

/*   SH_IPI_INT_BASE                                                    */
/*   Description:  Optional interrupt vector area, 2MB aligned          */
#define SH_IPI_INT_BASE_SHFT				21
#define SH_IPI_INT_BASE_MASK 		__IA64_UL_CONST(0x0003ffffffe00000)

/*   SH_IPI_INT_IDX                                                     */
/*   Description:  Targeted McKinley interrupt vector                   */
#define SH_IPI_INT_IDX_SHFT				52
#define SH_IPI_INT_IDX_MASK		__IA64_UL_CONST(0x0ff0000000000000)

/*   SH_IPI_INT_SEND                                                    */
/*   Description:  Send Interrupt Message to PI, This generates a puls  */
#define SH_IPI_INT_SEND_SHFT				63
#define SH_IPI_INT_SEND_MASK		__IA64_UL_CONST(0x8000000000000000)

/* ==================================================================== */
/*                     Register "SH_EVENT_OCCURRED"                     */
/*                    SHub Interrupt Event Occurred                     */
/* ==================================================================== */
#define SH1_EVENT_OCCURRED		__IA64_UL_CONST(0x0000000110010000)
#define SH1_EVENT_OCCURRED_ALIAS	__IA64_UL_CONST(0x0000000110010008)
#define SH2_EVENT_OCCURRED		__IA64_UL_CONST(0x0000000010010000)
#define SH2_EVENT_OCCURRED_ALIAS 	__IA64_UL_CONST(0x0000000010010008)

/* ==================================================================== */
/*                     Register "SH_PI_CAM_CONTROL"                     */
/*                      CRB CAM MMR Access Control                      */
/* ==================================================================== */
#define SH1_PI_CAM_CONTROL		__IA64_UL_CONST(0x0000000120050300)

/* ==================================================================== */
/*                        Register "SH_SHUB_ID"                         */
/*                            SHub ID Number                            */
/* ==================================================================== */
#define SH1_SHUB_ID			__IA64_UL_CONST(0x0000000110060580)
#define SH1_SHUB_ID_REVISION_SHFT			28
#define SH1_SHUB_ID_REVISION_MASK	__IA64_UL_CONST(0x00000000f0000000)

/* ==================================================================== */
/*                          Register "SH_RTC"                           */
/*                           Real-time Clock                            */
/* ==================================================================== */
#define SH1_RTC				__IA64_UL_CONST(0x00000001101c0000)
#define SH2_RTC				__IA64_UL_CONST(0x00000002101c0000)
#define SH_RTC_MASK			__IA64_UL_CONST(0x007fffffffffffff)

/* ==================================================================== */
/*                   Register "SH_PIO_WRITE_STATUS_0|1"                 */
/*                      PIO Write Status for CPU 0 & 1                  */
/* ==================================================================== */
#define SH1_PIO_WRITE_STATUS_0		__IA64_UL_CONST(0x0000000120070200)
#define SH1_PIO_WRITE_STATUS_1		__IA64_UL_CONST(0x0000000120070280)
#define SH2_PIO_WRITE_STATUS_0		__IA64_UL_CONST(0x0000000020070200)
#define SH2_PIO_WRITE_STATUS_1		__IA64_UL_CONST(0x0000000020070280)
#define SH2_PIO_WRITE_STATUS_2		__IA64_UL_CONST(0x0000000020070300)
#define SH2_PIO_WRITE_STATUS_3		__IA64_UL_CONST(0x0000000020070380)

/*   SH_PIO_WRITE_STATUS_0_WRITE_DEADLOCK                               */
/*   Description:  Deadlock response detected                           */
#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT		1
#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK \
					__IA64_UL_CONST(0x0000000000000002)

/*   SH_PIO_WRITE_STATUS_0_PENDING_WRITE_COUNT                          */
/*   Description:  Count of currently pending PIO writes                */
#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_SHFT	56
#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK \
					__IA64_UL_CONST(0x3f00000000000000)

/* ==================================================================== */
/*                Register "SH_PIO_WRITE_STATUS_0_ALIAS"                */
/* ==================================================================== */
#define SH1_PIO_WRITE_STATUS_0_ALIAS	__IA64_UL_CONST(0x0000000120070208)
#define SH2_PIO_WRITE_STATUS_0_ALIAS	__IA64_UL_CONST(0x0000000020070208)

/* ==================================================================== */
/*                     Register "SH_EVENT_OCCURRED"                     */
/*                    SHub Interrupt Event Occurred                     */
/* ==================================================================== */
/*   SH_EVENT_OCCURRED_UART_INT                                         */
/*   Description:  Pending Junk Bus UART Interrupt                      */
#define SH_EVENT_OCCURRED_UART_INT_SHFT			20
#define SH_EVENT_OCCURRED_UART_INT_MASK	__IA64_UL_CONST(0x0000000000100000)

/*   SH_EVENT_OCCURRED_IPI_INT                                          */
/*   Description:  Pending IPI Interrupt                                */
#define SH_EVENT_OCCURRED_IPI_INT_SHFT			28
#define SH_EVENT_OCCURRED_IPI_INT_MASK	__IA64_UL_CONST(0x0000000010000000)

/*   SH_EVENT_OCCURRED_II_INT0                                          */
/*   Description:  Pending II 0 Interrupt                               */
#define SH_EVENT_OCCURRED_II_INT0_SHFT			29
#define SH_EVENT_OCCURRED_II_INT0_MASK	__IA64_UL_CONST(0x0000000020000000)

/*   SH_EVENT_OCCURRED_II_INT1                                          */
/*   Description:  Pending II 1 Interrupt                               */
#define SH_EVENT_OCCURRED_II_INT1_SHFT			30
#define SH_EVENT_OCCURRED_II_INT1_MASK	__IA64_UL_CONST(0x0000000040000000)

/*   SH2_EVENT_OCCURRED_EXTIO_INT2                                      */
/*   Description:  Pending SHUB 2 EXT IO INT2                           */
#define SH2_EVENT_OCCURRED_EXTIO_INT2_SHFT		33
#define SH2_EVENT_OCCURRED_EXTIO_INT2_MASK __IA64_UL_CONST(0x0000000200000000)

/*   SH2_EVENT_OCCURRED_EXTIO_INT3                                      */
/*   Description:  Pending SHUB 2 EXT IO INT3                           */
#define SH2_EVENT_OCCURRED_EXTIO_INT3_SHFT		34
#define SH2_EVENT_OCCURRED_EXTIO_INT3_MASK __IA64_UL_CONST(0x0000000400000000)

#define SH_ALL_INT_MASK \
	(SH_EVENT_OCCURRED_UART_INT_MASK | SH_EVENT_OCCURRED_IPI_INT_MASK | \
	 SH_EVENT_OCCURRED_II_INT0_MASK | SH_EVENT_OCCURRED_II_INT1_MASK | \
	 SH_EVENT_OCCURRED_II_INT1_MASK | SH2_EVENT_OCCURRED_EXTIO_INT2_MASK | \
	 SH2_EVENT_OCCURRED_EXTIO_INT3_MASK)


/* ==================================================================== */
/*                         LEDS                                         */
/* ==================================================================== */
#define SH1_REAL_JUNK_BUS_LED0			0x7fed00000UL
#define SH1_REAL_JUNK_BUS_LED1			0x7fed10000UL
#define SH1_REAL_JUNK_BUS_LED2			0x7fed20000UL
#define SH1_REAL_JUNK_BUS_LED3			0x7fed30000UL

#define SH2_REAL_JUNK_BUS_LED0			0xf0000000UL
#define SH2_REAL_JUNK_BUS_LED1			0xf0010000UL
#define SH2_REAL_JUNK_BUS_LED2			0xf0020000UL
#define SH2_REAL_JUNK_BUS_LED3			0xf0030000UL

/* ==================================================================== */
/*                         Register "SH1_PTC_0"                         */
/*       Puge Translation Cache Message Configuration Information       */
/* ==================================================================== */
#define SH1_PTC_0			__IA64_UL_CONST(0x00000001101a0000)

/*   SH1_PTC_0_A                                                        */
/*   Description:  Type                                                 */
#define SH1_PTC_0_A_SHFT				0

/*   SH1_PTC_0_PS                                                       */
/*   Description:  Page Size                                            */
#define SH1_PTC_0_PS_SHFT				2

/*   SH1_PTC_0_RID                                                      */
/*   Description:  Region ID                                            */
#define SH1_PTC_0_RID_SHFT				8

/*   SH1_PTC_0_START                                                    */
/*   Description:  Start                                                */
#define SH1_PTC_0_START_SHFT				63

/* ==================================================================== */
/*                         Register "SH1_PTC_1"                         */
/*       Puge Translation Cache Message Configuration Information       */
/* ==================================================================== */
#define SH1_PTC_1			__IA64_UL_CONST(0x00000001101a0080)

/*   SH1_PTC_1_START                                                    */
/*   Description:  PTC_1 Start                                          */
#define SH1_PTC_1_START_SHFT				63

/* ==================================================================== */
/*                         Register "SH2_PTC"                           */
/*       Puge Translation Cache Message Configuration Information       */
/* ==================================================================== */
#define SH2_PTC				__IA64_UL_CONST(0x0000000170000000)

/*   SH2_PTC_A                                                          */
/*   Description:  Type                                                 */
#define SH2_PTC_A_SHFT					0

/*   SH2_PTC_PS                                                         */
/*   Description:  Page Size                                            */
#define SH2_PTC_PS_SHFT					2

/*   SH2_PTC_RID                                                      */
/*   Description:  Region ID                                            */
#define SH2_PTC_RID_SHFT				4

/*   SH2_PTC_START                                                      */
/*   Description:  Start                                                */
#define SH2_PTC_START_SHFT				63

/*   SH2_PTC_ADDR_RID                                                   */
/*   Description:  Region ID                                            */
#define SH2_PTC_ADDR_SHFT				4
#define SH2_PTC_ADDR_MASK		__IA64_UL_CONST(0x1ffffffffffff000)

/* ==================================================================== */
/*                    Register "SH_RTC1_INT_CONFIG"                     */
/*                SHub RTC 1 Interrupt Config Registers                 */
/* ==================================================================== */

#define SH1_RTC1_INT_CONFIG		__IA64_UL_CONST(0x0000000110001480)
#define SH2_RTC1_INT_CONFIG		__IA64_UL_CONST(0x0000000010001480)
#define SH_RTC1_INT_CONFIG_MASK		__IA64_UL_CONST(0x0ff3ffffffefffff)
#define SH_RTC1_INT_CONFIG_INIT		__IA64_UL_CONST(0x0000000000000000)

/*   SH_RTC1_INT_CONFIG_TYPE                                            */
/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
#define SH_RTC1_INT_CONFIG_TYPE_SHFT			0
#define SH_RTC1_INT_CONFIG_TYPE_MASK	__IA64_UL_CONST(0x0000000000000007)

/*   SH_RTC1_INT_CONFIG_AGT                                             */
/*   Description:  Agent, must be 0 for SHub                            */
#define SH_RTC1_INT_CONFIG_AGT_SHFT			3
#define SH_RTC1_INT_CONFIG_AGT_MASK	__IA64_UL_CONST(0x0000000000000008)

/*   SH_RTC1_INT_CONFIG_PID                                             */
/*   Description:  Processor ID, same setting as on targeted McKinley  */
#define SH_RTC1_INT_CONFIG_PID_SHFT			4
#define SH_RTC1_INT_CONFIG_PID_MASK	__IA64_UL_CONST(0x00000000000ffff0)

/*   SH_RTC1_INT_CONFIG_BASE                                            */
/*   Description:  Optional interrupt vector area, 2MB aligned          */
#define SH_RTC1_INT_CONFIG_BASE_SHFT			21
#define SH_RTC1_INT_CONFIG_BASE_MASK	__IA64_UL_CONST(0x0003ffffffe00000)

/*   SH_RTC1_INT_CONFIG_IDX                                             */
/*   Description:  Targeted McKinley interrupt vector                   */
#define SH_RTC1_INT_CONFIG_IDX_SHFT			52
#define SH_RTC1_INT_CONFIG_IDX_MASK	__IA64_UL_CONST(0x0ff0000000000000)

/* ==================================================================== */
/*                    Register "SH_RTC1_INT_ENABLE"                     */
/*                SHub RTC 1 Interrupt Enable Registers                 */
/* ==================================================================== */

#define SH1_RTC1_INT_ENABLE		__IA64_UL_CONST(0x0000000110001500)
#define SH2_RTC1_INT_ENABLE		__IA64_UL_CONST(0x0000000010001500)
#define SH_RTC1_INT_ENABLE_MASK		__IA64_UL_CONST(0x0000000000000001)
#define SH_RTC1_INT_ENABLE_INIT		__IA64_UL_CONST(0x0000000000000000)

/*   SH_RTC1_INT_ENABLE_RTC1_ENABLE                                     */
/*   Description:  Enable RTC 1 Interrupt                               */
#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_SHFT		0
#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_MASK \
					__IA64_UL_CONST(0x0000000000000001)

/* ==================================================================== */
/*                    Register "SH_RTC2_INT_CONFIG"                     */
/*                SHub RTC 2 Interrupt Config Registers                 */
/* ==================================================================== */

#define SH1_RTC2_INT_CONFIG		__IA64_UL_CONST(0x0000000110001580)
#define SH2_RTC2_INT_CONFIG		__IA64_UL_CONST(0x0000000010001580)
#define SH_RTC2_INT_CONFIG_MASK		__IA64_UL_CONST(0x0ff3ffffffefffff)
#define SH_RTC2_INT_CONFIG_INIT		__IA64_UL_CONST(0x0000000000000000)

/*   SH_RTC2_INT_CONFIG_TYPE                                            */
/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
#define SH_RTC2_INT_CONFIG_TYPE_SHFT			0
#define SH_RTC2_INT_CONFIG_TYPE_MASK	__IA64_UL_CONST(0x0000000000000007)

/*   SH_RTC2_INT_CONFIG_AGT                                             */
/*   Description:  Agent, must be 0 for SHub                            */
#define SH_RTC2_INT_CONFIG_AGT_SHFT			3
#define SH_RTC2_INT_CONFIG_AGT_MASK	__IA64_UL_CONST(0x0000000000000008)

/*   SH_RTC2_INT_CONFIG_PID                                             */
/*   Description:  Processor ID, same setting as on targeted McKinley  */
#define SH_RTC2_INT_CONFIG_PID_SHFT			4
#define SH_RTC2_INT_CONFIG_PID_MASK	__IA64_UL_CONST(0x00000000000ffff0)

/*   SH_RTC2_INT_CONFIG_BASE                                            */
/*   Description:  Optional interrupt vector area, 2MB aligned          */
#define SH_RTC2_INT_CONFIG_BASE_SHFT			21
#define SH_RTC2_INT_CONFIG_BASE_MASK	__IA64_UL_CONST(0x0003ffffffe00000)

/*   SH_RTC2_INT_CONFIG_IDX                                             */
/*   Description:  Targeted McKinley interrupt vector                   */
#define SH_RTC2_INT_CONFIG_IDX_SHFT			52
#define SH_RTC2_INT_CONFIG_IDX_MASK	__IA64_UL_CONST(0x0ff0000000000000)

/* ==================================================================== */
/*                    Register "SH_RTC2_INT_ENABLE"                     */
/*                SHub RTC 2 Interrupt Enable Registers                 */
/* ==================================================================== */

#define SH1_RTC2_INT_ENABLE		__IA64_UL_CONST(0x0000000110001600)
#define SH2_RTC2_INT_ENABLE		__IA64_UL_CONST(0x0000000010001600)
#define SH_RTC2_INT_ENABLE_MASK		__IA64_UL_CONST(0x0000000000000001)
#define SH_RTC2_INT_ENABLE_INIT		__IA64_UL_CONST(0x0000000000000000)

/*   SH_RTC2_INT_ENABLE_RTC2_ENABLE                                     */
/*   Description:  Enable RTC 2 Interrupt                               */
#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_SHFT		0
#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_MASK \
					__IA64_UL_CONST(0x0000000000000001)

/* ==================================================================== */
/*                    Register "SH_RTC3_INT_CONFIG"                     */
/*                SHub RTC 3 Interrupt Config Registers                 */
/* ==================================================================== */

#define SH1_RTC3_INT_CONFIG		__IA64_UL_CONST(0x0000000110001680)
#define SH2_RTC3_INT_CONFIG		__IA64_UL_CONST(0x0000000010001680)
#define SH_RTC3_INT_CONFIG_MASK		__IA64_UL_CONST(0x0ff3ffffffefffff)
#define SH_RTC3_INT_CONFIG_INIT		__IA64_UL_CONST(0x0000000000000000)

/*   SH_RTC3_INT_CONFIG_TYPE                                            */
/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
#define SH_RTC3_INT_CONFIG_TYPE_SHFT			0
#define SH_RTC3_INT_CONFIG_TYPE_MASK	__IA64_UL_CONST(0x0000000000000007)

/*   SH_RTC3_INT_CONFIG_AGT                                             */
/*   Description:  Agent, must be 0 for SHub                            */
#define SH_RTC3_INT_CONFIG_AGT_SHFT			3
#define SH_RTC3_INT_CONFIG_AGT_MASK	__IA64_UL_CONST(0x0000000000000008)

/*   SH_RTC3_INT_CONFIG_PID                                             */
/*   Description:  Processor ID, same setting as on targeted McKinley  */
#define SH_RTC3_INT_CONFIG_PID_SHFT			4
#define SH_RTC3_INT_CONFIG_PID_MASK	__IA64_UL_CONST(0x00000000000ffff0)

/*   SH_RTC3_INT_CONFIG_BASE                                            */
/*   Description:  Optional interrupt vector area, 2MB aligned          */
#define SH_RTC3_INT_CONFIG_BASE_SHFT			21
#define SH_RTC3_INT_CONFIG_BASE_MASK	__IA64_UL_CONST(0x0003ffffffe00000)

/*   SH_RTC3_INT_CONFIG_IDX                                             */
/*   Description:  Targeted McKinley interrupt vector                   */
#define SH_RTC3_INT_CONFIG_IDX_SHFT			52
#define SH_RTC3_INT_CONFIG_IDX_MASK	__IA64_UL_CONST(0x0ff0000000000000)

/* ==================================================================== */
/*                    Register "SH_RTC3_INT_ENABLE"                     */
/*                SHub RTC 3 Interrupt Enable Registers                 */
/* ==================================================================== */

#define SH1_RTC3_INT_ENABLE		__IA64_UL_CONST(0x0000000110001700)
#define SH2_RTC3_INT_ENABLE		__IA64_UL_CONST(0x0000000010001700)
#define SH_RTC3_INT_ENABLE_MASK		__IA64_UL_CONST(0x0000000000000001)
#define SH_RTC3_INT_ENABLE_INIT		__IA64_UL_CONST(0x0000000000000000)

/*   SH_RTC3_INT_ENABLE_RTC3_ENABLE                                     */
/*   Description:  Enable RTC 3 Interrupt                               */
#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_SHFT		0
#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_MASK \
					__IA64_UL_CONST(0x0000000000000001)

/*   SH_EVENT_OCCURRED_RTC1_INT                                         */
/*   Description:  Pending RTC 1 Interrupt                              */
#define SH_EVENT_OCCURRED_RTC1_INT_SHFT			24
#define SH_EVENT_OCCURRED_RTC1_INT_MASK	__IA64_UL_CONST(0x0000000001000000)

/*   SH_EVENT_OCCURRED_RTC2_INT                                         */
/*   Description:  Pending RTC 2 Interrupt                              */
#define SH_EVENT_OCCURRED_RTC2_INT_SHFT			25
#define SH_EVENT_OCCURRED_RTC2_INT_MASK	__IA64_UL_CONST(0x0000000002000000)

/*   SH_EVENT_OCCURRED_RTC3_INT                                         */
/*   Description:  Pending RTC 3 Interrupt                              */
#define SH_EVENT_OCCURRED_RTC3_INT_SHFT			26
#define SH_EVENT_OCCURRED_RTC3_INT_MASK	__IA64_UL_CONST(0x0000000004000000)

/* ==================================================================== */
/*                       Register "SH_IPI_ACCESS"                       */
/*                 CPU interrupt Access Permission Bits                 */
/* ==================================================================== */

#define SH1_IPI_ACCESS			__IA64_UL_CONST(0x0000000110060480)
#define SH2_IPI_ACCESS0			__IA64_UL_CONST(0x0000000010060c00)
#define SH2_IPI_ACCESS1			__IA64_UL_CONST(0x0000000010060c80)
#define SH2_IPI_ACCESS2			__IA64_UL_CONST(0x0000000010060d00)
#define SH2_IPI_ACCESS3			__IA64_UL_CONST(0x0000000010060d80)

/* ==================================================================== */
/*                        Register "SH_INT_CMPB"                        */
/*                  RTC Compare Value for Processor B                   */
/* ==================================================================== */

#define SH1_INT_CMPB			__IA64_UL_CONST(0x00000001101b0080)
#define SH2_INT_CMPB			__IA64_UL_CONST(0x00000000101b0080)
#define SH_INT_CMPB_MASK		__IA64_UL_CONST(0x007fffffffffffff)
#define SH_INT_CMPB_INIT		__IA64_UL_CONST(0x0000000000000000)

/*   SH_INT_CMPB_REAL_TIME_CMPB                                         */
/*   Description:  Real Time Clock Compare                              */
#define SH_INT_CMPB_REAL_TIME_CMPB_SHFT			0
#define SH_INT_CMPB_REAL_TIME_CMPB_MASK	__IA64_UL_CONST(0x007fffffffffffff)

/* ==================================================================== */
/*                        Register "SH_INT_CMPC"                        */
/*                  RTC Compare Value for Processor C                   */
/* ==================================================================== */

#define SH1_INT_CMPC			__IA64_UL_CONST(0x00000001101b0100)
#define SH2_INT_CMPC			__IA64_UL_CONST(0x00000000101b0100)
#define SH_INT_CMPC_MASK		__IA64_UL_CONST(0x007fffffffffffff)
#define SH_INT_CMPC_INIT		__IA64_UL_CONST(0x0000000000000000)

/*   SH_INT_CMPC_REAL_TIME_CMPC                                         */
/*   Description:  Real Time Clock Compare                              */
#define SH_INT_CMPC_REAL_TIME_CMPC_SHFT			0
#define SH_INT_CMPC_REAL_TIME_CMPC_MASK	__IA64_UL_CONST(0x007fffffffffffff)

/* ==================================================================== */
/*                        Register "SH_INT_CMPD"                        */
/*                  RTC Compare Value for Processor D                   */
/* ==================================================================== */

#define SH1_INT_CMPD			__IA64_UL_CONST(0x00000001101b0180)
#define SH2_INT_CMPD			__IA64_UL_CONST(0x00000000101b0180)
#define SH_INT_CMPD_MASK		__IA64_UL_CONST(0x007fffffffffffff)
#define SH_INT_CMPD_INIT		__IA64_UL_CONST(0x0000000000000000)

/*   SH_INT_CMPD_REAL_TIME_CMPD                                         */
/*   Description:  Real Time Clock Compare                              */
#define SH_INT_CMPD_REAL_TIME_CMPD_SHFT			0
#define SH_INT_CMPD_REAL_TIME_CMPD_MASK	__IA64_UL_CONST(0x007fffffffffffff)

/* ==================================================================== */
/*                Register "SH_MD_DQLP_MMR_DIR_PRIVEC0"                 */
/*                      privilege vector for acc=0                      */
/* ==================================================================== */
#define SH1_MD_DQLP_MMR_DIR_PRIVEC0	__IA64_UL_CONST(0x0000000100030300)

/* ==================================================================== */
/*                Register "SH_MD_DQRP_MMR_DIR_PRIVEC0"                 */
/*                      privilege vector for acc=0                      */
/* ==================================================================== */
#define SH1_MD_DQRP_MMR_DIR_PRIVEC0	__IA64_UL_CONST(0x0000000100050300)

/* ==================================================================== */
/* Some MMRs are functionally identical (or close enough) on both SHUB1 */
/* and SHUB2 that it makes sense to define a geberic name for the MMR.  */
/* It is acceptable to use (for example) SH_IPI_INT to reference the    */
/* the IPI MMR. The value of SH_IPI_INT is determined at runtime based  */
/* on the type of the SHUB. Do not use these #defines in performance    */
/* critical code  or loops - there is a small performance penalty.      */
/* ==================================================================== */
#define shubmmr(a,b) 		(is_shub2() ? a##2_##b : a##1_##b)

#define SH_REAL_JUNK_BUS_LED0	shubmmr(SH, REAL_JUNK_BUS_LED0)
#define SH_IPI_INT		shubmmr(SH, IPI_INT)
#define SH_EVENT_OCCURRED	shubmmr(SH, EVENT_OCCURRED)
#define SH_EVENT_OCCURRED_ALIAS	shubmmr(SH, EVENT_OCCURRED_ALIAS)
#define SH_RTC			shubmmr(SH, RTC)
#define SH_RTC1_INT_CONFIG	shubmmr(SH, RTC1_INT_CONFIG)
#define SH_RTC1_INT_ENABLE	shubmmr(SH, RTC1_INT_ENABLE)
#define SH_RTC2_INT_CONFIG	shubmmr(SH, RTC2_INT_CONFIG)
#define SH_RTC2_INT_ENABLE	shubmmr(SH, RTC2_INT_ENABLE)
#define SH_RTC3_INT_CONFIG	shubmmr(SH, RTC3_INT_CONFIG)
#define SH_RTC3_INT_ENABLE	shubmmr(SH, RTC3_INT_ENABLE)
#define SH_INT_CMPB		shubmmr(SH, INT_CMPB)
#define SH_INT_CMPC		shubmmr(SH, INT_CMPC)
#define SH_INT_CMPD		shubmmr(SH, INT_CMPD)

/* ========================================================================== */
/*                        Register "SH2_BT_ENG_CSR_0"                         */
/*                    Engine 0 Control and Status Register                    */
/* ========================================================================== */

#define SH2_BT_ENG_CSR_0		__IA64_UL_CONST(0x0000000030040000)
#define SH2_BT_ENG_SRC_ADDR_0		__IA64_UL_CONST(0x0000000030040080)
#define SH2_BT_ENG_DEST_ADDR_0		__IA64_UL_CONST(0x0000000030040100)
#define SH2_BT_ENG_NOTIF_ADDR_0		__IA64_UL_CONST(0x0000000030040180)

/* ========================================================================== */
/*                       BTE interfaces 1-3                                   */
/* ========================================================================== */

#define SH2_BT_ENG_CSR_1		__IA64_UL_CONST(0x0000000030050000)
#define SH2_BT_ENG_CSR_2		__IA64_UL_CONST(0x0000000030060000)
#define SH2_BT_ENG_CSR_3		__IA64_UL_CONST(0x0000000030070000)

#endif /* _ASM_IA64_SN_SHUB_MMR_H */

Filemanager

Name Type Size Permission Actions
sn2 Folder 0755
acpi.h File 423 B 0644
addrs.h File 9.69 KB 0644
arch.h File 2.72 KB 0644
bte.h File 7.61 KB 0644
clksupport.h File 844 B 0644
geo.h File 3.51 KB 0644
intr.h File 2.24 KB 0644
io.h File 5.68 KB 0644
ioc3.h File 7.91 KB 0644
klconfig.h File 10.15 KB 0644
l1.h File 2.28 KB 0644
leds.h File 819 B 0644
module.h File 4.01 KB 0644
mspec.h File 1.78 KB 0644
nodepda.h File 2.21 KB 0644
pcibr_provider.h File 5.52 KB 0644
pcibus_provider_defs.h File 2.16 KB 0644
pcidev.h File 3.05 KB 0644
pda.h File 1.94 KB 0644
pic.h File 9.06 KB 0644
rw_mmr.h File 944 B 0644
shub_mmr.h File 26.25 KB 0644
shubio.h File 127.34 KB 0644
simulator.h File 917 B 0644
sn_cpuid.h File 4.24 KB 0644
sn_feature_sets.h File 1.61 KB 0644
sn_sal.h File 33.14 KB 0644
tioca.h File 20.21 KB 0644
tioca_provider.h File 6 KB 0644
tioce.h File 29.87 KB 0644
tioce_provider.h File 1.49 KB 0644
tiocp.h File 8.3 KB 0644
tiocx.h File 2.24 KB 0644
types.h File 957 B 0644