404

[ Avaa Bypassed ]




Upload:

Command:

botdev@18.217.255.255: ~ $
<?php
# Generated by the protocol buffer compiler.  DO NOT EDIT!
# source: google/cloud/texttospeech/v1/cloud_tts.proto

namespace Google\Cloud\TextToSpeech\V1;

use Google\Protobuf\Internal\GPBType;
use Google\Protobuf\Internal\RepeatedField;
use Google\Protobuf\Internal\GPBUtil;

/**
 * Description of audio data to be synthesized.
 *
 * Generated from protobuf message <code>google.cloud.texttospeech.v1.AudioConfig</code>
 */
class AudioConfig extends \Google\Protobuf\Internal\Message
{
    /**
     * Required. The format of the requested audio byte stream.
     *
     * Generated from protobuf field <code>.google.cloud.texttospeech.v1.AudioEncoding audio_encoding = 1;</code>
     */
    private $audio_encoding = 0;
    /**
     * Optional speaking rate/speed, in the range [0.25, 4.0]. 1.0 is the normal
     * native speed supported by the specific voice. 2.0 is twice as fast, and
     * 0.5 is half as fast. If unset(0.0), defaults to the native 1.0 speed. Any
     * other values < 0.25 or > 4.0 will return an error.
     *
     * Generated from protobuf field <code>double speaking_rate = 2;</code>
     */
    private $speaking_rate = 0.0;
    /**
     * Optional speaking pitch, in the range [-20.0, 20.0]. 20 means increase 20
     * semitones from the original pitch. -20 means decrease 20 semitones from the
     * original pitch.
     *
     * Generated from protobuf field <code>double pitch = 3;</code>
     */
    private $pitch = 0.0;
    /**
     * Optional volume gain (in dB) of the normal native volume supported by the
     * specific voice, in the range [-96.0, 16.0]. If unset, or set to a value of
     * 0.0 (dB), will play at normal native signal amplitude. A value of -6.0 (dB)
     * will play at approximately half the amplitude of the normal native signal
     * amplitude. A value of +6.0 (dB) will play at approximately twice the
     * amplitude of the normal native signal amplitude. Strongly recommend not to
     * exceed +10 (dB) as there's usually no effective increase in loudness for
     * any value greater than that.
     *
     * Generated from protobuf field <code>double volume_gain_db = 4;</code>
     */
    private $volume_gain_db = 0.0;
    /**
     * The synthesis sample rate (in hertz) for this audio. Optional.  If this is
     * different from the voice's natural sample rate, then the synthesizer will
     * honor this request by converting to the desired sample rate (which might
     * result in worse audio quality), unless the specified sample rate is not
     * supported for the encoding chosen, in which case it will fail the request
     * and return [google.rpc.Code.INVALID_ARGUMENT][].
     *
     * Generated from protobuf field <code>int32 sample_rate_hertz = 5;</code>
     */
    private $sample_rate_hertz = 0;
    /**
     * An identifier which selects 'audio effects' profiles that are applied on
     * (post synthesized) text to speech.
     * Effects are applied on top of each other in the order they are given.
     * See
     * [audio-profiles](https:
     * //cloud.google.com/text-to-speech/docs/audio-profiles)
     * for current supported profile ids.
     *
     * Generated from protobuf field <code>repeated string effects_profile_id = 6;</code>
     */
    private $effects_profile_id;

    /**
     * Constructor.
     *
     * @param array $data {
     *     Optional. Data for populating the Message object.
     *
     *     @type int $audio_encoding
     *           Required. The format of the requested audio byte stream.
     *     @type float $speaking_rate
     *           Optional speaking rate/speed, in the range [0.25, 4.0]. 1.0 is the normal
     *           native speed supported by the specific voice. 2.0 is twice as fast, and
     *           0.5 is half as fast. If unset(0.0), defaults to the native 1.0 speed. Any
     *           other values < 0.25 or > 4.0 will return an error.
     *     @type float $pitch
     *           Optional speaking pitch, in the range [-20.0, 20.0]. 20 means increase 20
     *           semitones from the original pitch. -20 means decrease 20 semitones from the
     *           original pitch.
     *     @type float $volume_gain_db
     *           Optional volume gain (in dB) of the normal native volume supported by the
     *           specific voice, in the range [-96.0, 16.0]. If unset, or set to a value of
     *           0.0 (dB), will play at normal native signal amplitude. A value of -6.0 (dB)
     *           will play at approximately half the amplitude of the normal native signal
     *           amplitude. A value of +6.0 (dB) will play at approximately twice the
     *           amplitude of the normal native signal amplitude. Strongly recommend not to
     *           exceed +10 (dB) as there's usually no effective increase in loudness for
     *           any value greater than that.
     *     @type int $sample_rate_hertz
     *           The synthesis sample rate (in hertz) for this audio. Optional.  If this is
     *           different from the voice's natural sample rate, then the synthesizer will
     *           honor this request by converting to the desired sample rate (which might
     *           result in worse audio quality), unless the specified sample rate is not
     *           supported for the encoding chosen, in which case it will fail the request
     *           and return [google.rpc.Code.INVALID_ARGUMENT][].
     *     @type string[]|\Google\Protobuf\Internal\RepeatedField $effects_profile_id
     *           An identifier which selects 'audio effects' profiles that are applied on
     *           (post synthesized) text to speech.
     *           Effects are applied on top of each other in the order they are given.
     *           See
     *           [audio-profiles](https:
     *           //cloud.google.com/text-to-speech/docs/audio-profiles)
     *           for current supported profile ids.
     * }
     */
    public function __construct($data = NULL) {
        \GPBMetadata\Google\Cloud\Texttospeech\V1\CloudTts::initOnce();
        parent::__construct($data);
    }

    /**
     * Required. The format of the requested audio byte stream.
     *
     * Generated from protobuf field <code>.google.cloud.texttospeech.v1.AudioEncoding audio_encoding = 1;</code>
     * @return int
     */
    public function getAudioEncoding()
    {
        return $this->audio_encoding;
    }

    /**
     * Required. The format of the requested audio byte stream.
     *
     * Generated from protobuf field <code>.google.cloud.texttospeech.v1.AudioEncoding audio_encoding = 1;</code>
     * @param int $var
     * @return $this
     */
    public function setAudioEncoding($var)
    {
        GPBUtil::checkEnum($var, \Google\Cloud\TextToSpeech\V1\AudioEncoding::class);
        $this->audio_encoding = $var;

        return $this;
    }

    /**
     * Optional speaking rate/speed, in the range [0.25, 4.0]. 1.0 is the normal
     * native speed supported by the specific voice. 2.0 is twice as fast, and
     * 0.5 is half as fast. If unset(0.0), defaults to the native 1.0 speed. Any
     * other values < 0.25 or > 4.0 will return an error.
     *
     * Generated from protobuf field <code>double speaking_rate = 2;</code>
     * @return float
     */
    public function getSpeakingRate()
    {
        return $this->speaking_rate;
    }

    /**
     * Optional speaking rate/speed, in the range [0.25, 4.0]. 1.0 is the normal
     * native speed supported by the specific voice. 2.0 is twice as fast, and
     * 0.5 is half as fast. If unset(0.0), defaults to the native 1.0 speed. Any
     * other values < 0.25 or > 4.0 will return an error.
     *
     * Generated from protobuf field <code>double speaking_rate = 2;</code>
     * @param float $var
     * @return $this
     */
    public function setSpeakingRate($var)
    {
        GPBUtil::checkDouble($var);
        $this->speaking_rate = $var;

        return $this;
    }

    /**
     * Optional speaking pitch, in the range [-20.0, 20.0]. 20 means increase 20
     * semitones from the original pitch. -20 means decrease 20 semitones from the
     * original pitch.
     *
     * Generated from protobuf field <code>double pitch = 3;</code>
     * @return float
     */
    public function getPitch()
    {
        return $this->pitch;
    }

    /**
     * Optional speaking pitch, in the range [-20.0, 20.0]. 20 means increase 20
     * semitones from the original pitch. -20 means decrease 20 semitones from the
     * original pitch.
     *
     * Generated from protobuf field <code>double pitch = 3;</code>
     * @param float $var
     * @return $this
     */
    public function setPitch($var)
    {
        GPBUtil::checkDouble($var);
        $this->pitch = $var;

        return $this;
    }

    /**
     * Optional volume gain (in dB) of the normal native volume supported by the
     * specific voice, in the range [-96.0, 16.0]. If unset, or set to a value of
     * 0.0 (dB), will play at normal native signal amplitude. A value of -6.0 (dB)
     * will play at approximately half the amplitude of the normal native signal
     * amplitude. A value of +6.0 (dB) will play at approximately twice the
     * amplitude of the normal native signal amplitude. Strongly recommend not to
     * exceed +10 (dB) as there's usually no effective increase in loudness for
     * any value greater than that.
     *
     * Generated from protobuf field <code>double volume_gain_db = 4;</code>
     * @return float
     */
    public function getVolumeGainDb()
    {
        return $this->volume_gain_db;
    }

    /**
     * Optional volume gain (in dB) of the normal native volume supported by the
     * specific voice, in the range [-96.0, 16.0]. If unset, or set to a value of
     * 0.0 (dB), will play at normal native signal amplitude. A value of -6.0 (dB)
     * will play at approximately half the amplitude of the normal native signal
     * amplitude. A value of +6.0 (dB) will play at approximately twice the
     * amplitude of the normal native signal amplitude. Strongly recommend not to
     * exceed +10 (dB) as there's usually no effective increase in loudness for
     * any value greater than that.
     *
     * Generated from protobuf field <code>double volume_gain_db = 4;</code>
     * @param float $var
     * @return $this
     */
    public function setVolumeGainDb($var)
    {
        GPBUtil::checkDouble($var);
        $this->volume_gain_db = $var;

        return $this;
    }

    /**
     * The synthesis sample rate (in hertz) for this audio. Optional.  If this is
     * different from the voice's natural sample rate, then the synthesizer will
     * honor this request by converting to the desired sample rate (which might
     * result in worse audio quality), unless the specified sample rate is not
     * supported for the encoding chosen, in which case it will fail the request
     * and return [google.rpc.Code.INVALID_ARGUMENT][].
     *
     * Generated from protobuf field <code>int32 sample_rate_hertz = 5;</code>
     * @return int
     */
    public function getSampleRateHertz()
    {
        return $this->sample_rate_hertz;
    }

    /**
     * The synthesis sample rate (in hertz) for this audio. Optional.  If this is
     * different from the voice's natural sample rate, then the synthesizer will
     * honor this request by converting to the desired sample rate (which might
     * result in worse audio quality), unless the specified sample rate is not
     * supported for the encoding chosen, in which case it will fail the request
     * and return [google.rpc.Code.INVALID_ARGUMENT][].
     *
     * Generated from protobuf field <code>int32 sample_rate_hertz = 5;</code>
     * @param int $var
     * @return $this
     */
    public function setSampleRateHertz($var)
    {
        GPBUtil::checkInt32($var);
        $this->sample_rate_hertz = $var;

        return $this;
    }

    /**
     * An identifier which selects 'audio effects' profiles that are applied on
     * (post synthesized) text to speech.
     * Effects are applied on top of each other in the order they are given.
     * See
     * [audio-profiles](https:
     * //cloud.google.com/text-to-speech/docs/audio-profiles)
     * for current supported profile ids.
     *
     * Generated from protobuf field <code>repeated string effects_profile_id = 6;</code>
     * @return \Google\Protobuf\Internal\RepeatedField
     */
    public function getEffectsProfileId()
    {
        return $this->effects_profile_id;
    }

    /**
     * An identifier which selects 'audio effects' profiles that are applied on
     * (post synthesized) text to speech.
     * Effects are applied on top of each other in the order they are given.
     * See
     * [audio-profiles](https:
     * //cloud.google.com/text-to-speech/docs/audio-profiles)
     * for current supported profile ids.
     *
     * Generated from protobuf field <code>repeated string effects_profile_id = 6;</code>
     * @param string[]|\Google\Protobuf\Internal\RepeatedField $var
     * @return $this
     */
    public function setEffectsProfileId($var)
    {
        $arr = GPBUtil::checkRepeatedField($var, \Google\Protobuf\Internal\GPBType::STRING);
        $this->effects_profile_id = $arr;

        return $this;
    }

}


Filemanager

Name Type Size Permission Actions
Gapic Folder 0755
resources Folder 0755
AudioConfig.php File 13.02 KB 0644
AudioEncoding.php File 2.2 KB 0644
ListVoicesRequest.php File 3.7 KB 0644
ListVoicesResponse.php File 1.91 KB 0644
README.md File 821 B 0644
SsmlVoiceGender.php File 2.1 KB 0644
SynthesisInput.php File 3.03 KB 0644
SynthesizeSpeechRequest.php File 4.34 KB 0644
SynthesizeSpeechResponse.php File 2.62 KB 0644
TextToSpeechClient.php File 1.18 KB 0644
TextToSpeechGrpcClient.php File 2.33 KB 0644
Voice.php File 5.17 KB 0644
VoiceSelectionParams.php File 8.36 KB 0644